AutoCodes – GMC – B1008 2018 GMC Sierra

B1008 2018 GMC Sierra Code - Calibration Data Not Programmed

Quick Answer

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1008 2018 GMC Sierra indicates Calibration Data Not Programmed.
Common causes: Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 245

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1008 2018 GMC Sierra Description

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. During the power-up mode, the Frontview Camera Module checks for a valid calibration data set. The Diagnostic Trouble Code (DTC) will be set if the Frontview Camera Module has been replaced and programmed, but not calibrated.

OBDII Code B1008 2018 GMC Sierra - Calibration Data Not Programmed - AutoCodes.com — B1008 2018 GMC Sierra Code - Calibration Data Not Programmed

What does this mean?

What are the Possible Causes of the DTC B1008 2018 GMC Sierra?

Frontview Camera Module Calibration
Faulty Frontview Camera Module
Frontview Camera Module harness is open or shorted
Frontview Camera Module circuit poor electrical connection

How to Fix the DTC B1008 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1008 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1008 2018 GMC Sierra code?

Need more information on how to fix the B1008 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 2018 GMC Sierra Code

1. What does the OBDII code B1008 on a 2018 GMC Sierra mean?

The code B1008 indicates that the calibration data is not programmed in the vehicle's system.

2. What are the common symptoms of OBDII code B1008 in a 2018 GMC Sierra?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system.

3. What are the possible causes of the Calibration Data Not Programmed code B1008 in a 2018 GMC Sierra?

The B1008 code can be triggered by a disconnected or faulty airbag module, a software glitch, or issues with the vehicle's electrical system.

4. How can I diagnose the Calibration Data Not Programmed OBDII code B1008 in my 2018 GMC Sierra?

Diagnosing the B1008 code typically involves using a diagnostic scanner to retrieve the specific fault codes and checking the connections to the airbag module for any issues.

5. Is it safe to drive my 2018 GMC Sierra with the B1008 code showing?

It is not recommended to drive the vehicle with the B1008 code active, as it indicates a potential problem with the airbag system that could affect its functionality in the event of an accident.

6. How can I repair the Calibration Data Not Programmed code B1008 in my 2018 GMC Sierra?

Repairing the B1008 code may involve reprogramming the calibration data in the airbag module, checking for loose connections, or replacing any faulty components.

7. Can I reset the B1008 code in my 2018 GMC Sierra without fixing the underlying issue?

While you can clear the code temporarily, it will likely reappear if the root cause of the Calibration Data Not Programmed issue is not addressed.

8. How much does it typically cost to repair the B1008 code in a 2018 GMC Sierra?

The cost of repairing the B1008 code can vary depending on the specific cause of the issue, but it may involve labor costs for diagnosis and potentially replacing components.

9. Can I fix the Calibration Data Not Programmed code B1008 in my 2018 GMC Sierra myself?

While some DIY enthusiasts may be able to address the B1008 code by checking connections and reprogramming the airbag module, it's recommended to consult a professional for proper diagnosis and repair.

10. Will the B1008 code on my 2018 GMC Sierra cause my airbags to malfunction?

The B1008 code itself does not indicate a malfunctioning airbag, but it signifies a potential issue with the airbag system that should be addressed promptly to ensure proper functionality in case of an accident.