AutoCodes – GMC – B1008 2017 GMC Sierra

B1008 2017 GMC Sierra Code - Calibration Data Not Programmed

Quick Answer

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1008 2017 GMC Sierra indicates Calibration Data Not Programmed.
Common causes: Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 313

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1008 2017 GMC Sierra Description

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. During the power-up mode, the Frontview Camera Module checks for a valid calibration data set. The Diagnostic Trouble Code (DTC) will be set if the Frontview Camera Module has been replaced and programmed, but not calibrated.

OBDII Code B1008 2017 GMC Sierra - Calibration Data Not Programmed - AutoCodes.com — B1008 2017 GMC Sierra Code - Calibration Data Not Programmed

What does this mean?

What are the Possible Causes of the DTC B1008 2017 GMC Sierra?

Frontview Camera Module Calibration
Faulty Frontview Camera Module
Frontview Camera Module harness is open or shorted
Frontview Camera Module circuit poor electrical connection

How to Fix the DTC B1008 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1008 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1008 2017 GMC Sierra code?

Need more information on how to fix the B1008 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 2017 GMC Sierra Code

1. What does the OBDII code B1008 mean on a 2017 GMC Sierra?

The B1008 code indicates that the calibration data has not been programmed into the vehicle's control unit. This is essential for the proper operation of the vehicle's systems.

2. What symptoms might I notice if my 2017 GMC Sierra has the B1008 code?

Symptoms can include issues such as erratic behavior of the instrument cluster, warning lights that stay on, and possibly the vehicle failing to start or perform optimally.

3. What causes the B1008 code to appear on a 2017 GMC Sierra?

This code is typically triggered when a control module in the vehicle, such as the BCM (Body Control Module), is replaced without proper reprogramming or if there has been a failure in updating the software during routine service.

4. How can I fix the B1008 code in my 2017 GMC Sierra?

To resolve this code, the control module that has not been programmed needs to be set up with the correct calibration data using specialized diagnostic software. This is typically done at a dealership or a well-equipped auto repair shop.

5. Is it safe to drive my 2017 GMC Sierra with the B1008 code?

While the vehicle may still operate, driving with this code is not recommended. The improper calibration can affect various systems, leading to reduced functionality and potentially compromising vehicle safety.

6. How urgent is it to address the B1008 code on a 2017 GMC Sierra?

It is fairly urgent to address this issue as the calibration data is crucial for the proper functioning of vehicle systems. Delaying repair can lead to further complications.

7. Can I program the calibration data myself to fix the B1008 code on my 2017 GMC Sierra?

Programming calibration data typically requires specialized tools and software that are usually only available at dealerships or specialized auto repair facilities. It is not recommended as a DIY fix.

8. What tools are required to diagnose and fix the B1008 code in a 2017 GMC Sierra?

Diagnosing and fixing the B1008 code requires a professional-grade OBDII scanner, a computer with the appropriate software for programming vehicle control modules, and sometimes internet access to download the correct calibration files from the manufacturer.

9. Could ignoring the B1008 code lead to other problems in my 2017 GMC Sierra?

Yes, ignoring this code can lead to other issues, such as impaired safety features, decreased performance, and the potential for other critical systems to malfunction.