AutoCodes – Chevrolet – B1008 2017 Chevrolet Silverado

B1008 2017 Chevrolet Silverado Code - Calibration Data Not Programmed

Quick Answer

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1008 2017 Chevrolet Silverado indicates Calibration Data Not Programmed.
Common causes: Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 223

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1008 2017 Chevrolet Silverado Description

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. During the power-up mode, the Frontview Camera Module checks for a valid calibration data set. The Diagnostic Trouble Code (DTC) will be set if the Frontview Camera Module has been replaced and programmed, but not calibrated.

OBDII Code B1008 2017 Chevrolet Silverado - Calibration Data Not Programmed - AutoCodes.com — B1008 2017 Chevrolet Silverado Code - Calibration Data Not Programmed

What does this mean?

What are the Possible Causes of the DTC B1008 2017 Chevrolet Silverado?

Frontview Camera Module Calibration
Faulty Frontview Camera Module
Frontview Camera Module harness is open or shorted
Frontview Camera Module circuit poor electrical connection

How to Fix the DTC B1008 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1008 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1008 2017 Chevrolet Silverado code?

Need more information on how to fix the B1008 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 2017 Chevrolet Silverado Code

1. What does the OBDII code B1008 mean on a 2017 Chevrolet Silverado?

The code B1008 indicates that the Calibration Data for a specific control module, usually the Body Control Module (BCM), has not been programmed or is corrupted.

2. What are the symptoms of the B1008 code in a 2017 Chevrolet Silverado?

Symptoms may include malfunctioning electrical components, warning lights on the dashboard, and possible communication errors between vehicle modules.

3. What causes the B1008 code to appear on a 2017 Silverado?

Common causes include incomplete module programming, software corruption, or an interrupted calibration update.

4. How is the B1008 code diagnosed?

A technician will use a scan tool to verify the code, check for incomplete programming, and ensure the affected module is receiving proper power and ground signals.

5. Can the B1008 code affect the performance of the vehicle?

While it typically doesnâ€™t affect engine performance, it can impact the functionality of electrical systems controlled by the affected module.

6. What tools are needed to fix the B1008 code on a 2017 Silverado?

A GM-compatible scan tool or reprogramming device, stable internet connection, and access to GM's Service Programming System (SPS) are required for reprogramming the module.

7. How do you fix the B1008 code on a 2017 Chevrolet Silverado?

The fix usually involves reprogramming the Body Control Module (BCM) with the correct calibration data using GM's Service Programming System.

8. Can a power loss during programming cause the B1008 code?

Yes, if there is a power interruption during programming, the calibration data may not load properly, triggering the B1008 code.

9. Is it safe to drive with the B1008 code on a 2017 Silverado?

It may be safe to drive short-term, but since it can affect electrical systems, itâ€™s best to address the issue promptly to avoid further complications.

10. Do I need to take my Silverado to the dealership for the B1008 code?

While dealerships have the tools and expertise to handle this issue, independent repair shops with GM-compatible programming tools can also fix it.