B1008 2016 GMC Sierra Code - Calibration Data Not Programmed
Quick Answer
The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1008 2016 GMC Sierra indicates Calibration Data Not Programmed.
- Common causes
- Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1008 2016 GMC Sierra Description
What are the Possible Causes of the DTC B1008 2016 GMC Sierra?
- Frontview Camera Module Calibration
- Faulty Frontview Camera Module
- Frontview Camera Module harness is open or shorted
- Frontview Camera Module circuit poor electrical connection
How to Fix the DTC B1008 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1008 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1008 2016 GMC Sierra code?
Need more information on how to fix the B1008 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1008 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1008 2016 GMC Sierra Code
1. What does the OBDII code B1008 mean on a 2016 GMC Sierra?
B1008 indicates that the Calibration Data for a specific module, typically the Body Control Module (BCM), has not been programmed or is missing.
2. What are the symptoms of the B1008 code on a 2016 GMC Sierra?
Symptoms may include erratic or non-functional electronic components like lights, wipers, or door locks, along with a possible warning light on the dashboard.
3. What causes the B1008 code to appear on a 2016 GMC Sierra?
This code is usually caused by a failure to program the module after replacement, a software update issue, or a corrupted calibration file.
4. Can I drive my 2016 GMC Sierra with the B1008 code?
Yes, you can generally drive the vehicle, but some electronic features may not function properly, potentially affecting comfort or safety.
5. How do I fix the B1008 code on a 2016 GMC Sierra?
The module with missing calibration data needs to be reprogrammed using a GM-approved scan tool and updated with the correct software.
6. What tools are required to fix the B1008 code on a 2016 GMC Sierra?
You’ll need a GM Tech 2 or a compatible diagnostic scanner capable of programming and updating calibration data.
7. Can the B1008 code be fixed without professional tools?
No, this code typically requires specialized tools and access to GM’s programming software, so professional assistance is recommended.
8. Does replacing a module in the 2016 GMC Sierra cause the B1008 code?
Yes, replacing a module, such as the BCM, without proper programming will often trigger this code.
9. How much does it cost to fix the B1008 code on a 2016 GMC Sierra?
The cost varies but generally ranges from $100 to $300, depending on labor rates and whether software licensing fees apply.
10. How can I prevent the B1008 code on my 2016 GMC Sierra?
Ensure that any replaced or updated modules are programmed correctly using GM-certified tools and procedures.
Discuss the causes and fixes for B1008 2016 GMC Sierra OBDII Code
Code B1008 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
