B1008 2016 Chevrolet Silverado Code - Calibration Data Not Programmed
Quick Answer
The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1008 2016 Chevrolet Silverado indicates Calibration Data Not Programmed.
- Common causes
- Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1008 2016 Chevrolet Silverado Description
What are the Possible Causes of the DTC B1008 2016 Chevrolet Silverado?
- Frontview Camera Module Calibration
- Faulty Frontview Camera Module
- Frontview Camera Module harness is open or shorted
- Frontview Camera Module circuit poor electrical connection
How to Fix the DTC B1008 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1008 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1008 2016 Chevrolet Silverado code?
Need more information on how to fix the B1008 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1008 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1008 2016 Chevrolet Silverado Code
1. What does the OBDII code B1008 mean on a 2016 Chevrolet Silverado?
B1008 indicates that the calibration data for a specific module, typically the Body Control Module (BCM), has not been programmed or is incomplete.
2. What are the common symptoms of the B1008 code in a 2016 Chevrolet Silverado?
Symptoms may include malfunctioning electronic systems, warning lights on the dashboard, or issues with features like power windows, locks, or lights.
3. What causes the B1008 code to appear?
The code is usually caused by a module replacement, incorrect programming, or a software update that was not completed properly.
4. How do I fix the B1008 code on my Silverado?
The code can usually be resolved by reprogramming the affected module with the correct calibration data using a GM-approved scan tool.
5. Can I drive my 2016 Chevrolet Silverado with the B1008 code?
Yes, but certain electronic features may not function correctly, and it’s recommended to address the issue promptly to avoid further complications.
6. Which module is typically affected by the B1008 code?
The Body Control Module (BCM) is most commonly associated with this code, but other modules could also be affected.
7. Do I need a dealership to fix the B1008 code?
While it’s possible to fix it yourself with the right tools, most drivers will need a dealership or qualified technician to program the correct calibration data.
8. What tools are required to fix the B1008 code?
You’ll need a GM-approved scan tool, such as a Tech 2 or GM MDI, and access to the GM SPS (Service Programming System) for the correct calibration files.
9. Can a dead battery cause the B1008 code to appear?
A dead or disconnected battery can sometimes cause calibration data to become corrupted or lost, potentially triggering this code.
10. How much does it cost to fix the B1008 code on a 2016 Silverado?
Repair costs can vary but typically range from $100 to $300, depending on labor rates and whether new calibration software is needed.
Discuss the causes and fixes for B1008 2016 Chevrolet Silverado OBDII Code
Code B1008 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
