AutoCodes – GMC – B1008 2015 GMC Sierra

B1008 2015 GMC Sierra Code - Calibration Data Not Programmed

Quick Answer

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1008 2015 GMC Sierra indicates Calibration Data Not Programmed.
Common causes: Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 223

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1008 2015 GMC Sierra Description

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. During the power-up mode, the Frontview Camera Module checks for a valid calibration data set. The Diagnostic Trouble Code (DTC) will be set if the Frontview Camera Module has been replaced and programmed, but not calibrated.

OBDII Code B1008 2015 GMC Sierra - Calibration Data Not Programmed - AutoCodes.com — B1008 2015 GMC Sierra Code - Calibration Data Not Programmed

What does this mean?

What are the Possible Causes of the DTC B1008 2015 GMC Sierra?

Frontview Camera Module Calibration
Faulty Frontview Camera Module
Frontview Camera Module harness is open or shorted
Frontview Camera Module circuit poor electrical connection

How to Fix the DTC B1008 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1008 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1008 2015 GMC Sierra code?

Need more information on how to fix the B1008 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 2015 GMC Sierra Code

1. What does OBDII code B1008 for a 2015 GMC Sierra mean?

The B1008 code indicates that the calibration data for a particular component in the vehicle has not been programmed properly.

2. What are the common symptoms of OBDII code B1008 in a 2015 GMC Sierra?

Common symptoms of code B1008 may include issues with the affected component's functionality, such as erratic behavior or malfunction.

3. What are the potential causes of OBDII code B1008 in a 2015 GMC Sierra?

Possible causes of code B1008 can include a faulty sensor, wiring issues, software glitches, or a programming error during a recent repair or maintenance work.

4. How can I diagnose OBDII code B1008 in my 2015 GMC Sierra?

Diagnosing code B1008 typically involves using an OBDII scanner to retrieve the specific details of the code, inspecting the related component and its wiring for any visible damage, and performing a calibration check.

5. What are the repair options for OBDII code B1008 in a 2015 GMC Sierra?

Repair options for code B1008 may include recalibrating the affected component, repairing or replacing any damaged wiring, updating the vehicle's software, or seeking assistance from a professional mechanic.

6. Can I drive my 2015 GMC Sierra with OBDII code B1008?

It is not recommended to drive your vehicle with an unresolved B1008 code, as it may lead to further damage or safety risks. It's best to address the issue promptly.

7. How much does it cost to fix OBDII code B1008 in a 2015 GMC Sierra?

The cost of fixing code B1008 can vary depending on the specific cause of the issue, the required repairs, and labor costs. It's advisable to get a diagnosis from a mechanic for an accurate estimate.

8. Can I reset OBDII code B1008 in my 2015 GMC Sierra on my own?

You can attempt to clear the B1008 code with an OBDII scanner, but it's important to address the underlying cause first to prevent the code from reappearing.

9. Will OBDII code B1008 cause my 2015 GMC Sierra to fail an emissions test?

If code B1008 affects a component related to emissions control, it may cause your vehicle to fail an emissions test. It's crucial to resolve the issue before undergoing emissions testing.

10. How often does OBDII code B1008 occur in a 2015 GMC Sierra?

The occurrence of code B1008 can vary depending on various factors, such as vehicle usage, maintenance history, and environmental conditions. If the code appears, it should be addressed promptly to prevent potential issues.