AutoCodes – GMC – B1008 2014 GMC Sierra

B1008 2014 GMC Sierra Code - Calibration Data Not Programmed

Quick Answer

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1008 2014 GMC Sierra indicates Calibration Data Not Programmed.
Common causes: Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 193

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1008 2014 GMC Sierra Description

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. During the power-up mode, the Frontview Camera Module checks for a valid calibration data set. The Diagnostic Trouble Code (DTC) will be set if the Frontview Camera Module has been replaced and programmed, but not calibrated.

OBDII Code B1008 2014 GMC Sierra - Calibration Data Not Programmed - AutoCodes.com — B1008 2014 GMC Sierra Code - Calibration Data Not Programmed

What does this mean?

What are the Possible Causes of the DTC B1008 2014 GMC Sierra?

Frontview Camera Module Calibration
Faulty Frontview Camera Module
Frontview Camera Module harness is open or shorted
Frontview Camera Module circuit poor electrical connection

How to Fix the DTC B1008 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1008 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1008 2014 GMC Sierra code?

Need more information on how to fix the B1008 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 2014 GMC Sierra Code

What does the OBDII code B1008 mean for a 2014 GMC Sierra?

B1008 indicates that the calibration data for the body control module (BCM) is not programmed or has become corrupted.

What are the symptoms of the B1008 code in a 2014 GMC Sierra?

Common symptoms may include malfunctioning lights, non-functional power windows, issues with the vehicle's security system, or failure of other electronic components.

What could cause the B1008 code to appear?

The code may be triggered by a faulty BCM, improper programming after a replacement, or a failure during a software update.

Is it safe to drive a vehicle with the B1008 code?

While it may be safe to drive, the vehicle's electrical systems might not function correctly, which can lead to safety issues. It's advisable to address the code promptly.

How can I fix the B1008 code on my GMC Sierra?

The most effective fix is to reprogram the BCM using a compatible scan tool. In some cases, you may need to replace the BCM if it is defective.

Can I clear the B1008 code without fixing the issue?

Yes, you can clear the code, but it will likely return if the underlying problem, such as unprogrammed calibration data, is not addressed.

Will disconnecting the battery reset the B1008 code?

Disconnecting the battery may temporarily reset the code, but if the calibration data is indeed unprogrammed, the code will reappear once the vehicle is started again.

How much does it typically cost to repair the B1008 code?

Repair costs can vary widely depending on whether you need a reprogramming service or a BCM replacement, but it typically ranges from $100 to $500.

Can I perform the reprogramming myself for the B1008 code?

Reprogramming the BCM usually requires specialized equipment and software that most DIYers do not have access to, so it is best performed by a professional technician.