AutoCodes – Chevrolet – B1008 2014 Chevrolet Silverado

B1008 2014 Chevrolet Silverado Code - Calibration Data Not Programmed

Quick Answer

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1008 2014 Chevrolet Silverado indicates Calibration Data Not Programmed.
Common causes: Common causes include Frontview Camera Module Calibration, Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 254

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1008 2014 Chevrolet Silverado Description

The Frontview Camera Module performs a self-test to verify if a critical malfunction exists within the system. During the power-up mode, the Frontview Camera Module checks for a valid calibration data set. The Diagnostic Trouble Code (DTC) will be set if the Frontview Camera Module has been replaced and programmed, but not calibrated.

OBDII Code B1008 2014 Chevrolet Silverado - Calibration Data Not Programmed - AutoCodes.com — B1008 2014 Chevrolet Silverado Code - Calibration Data Not Programmed

What does this mean?

What are the Possible Causes of the DTC B1008 2014 Chevrolet Silverado?

Frontview Camera Module Calibration
Faulty Frontview Camera Module
Frontview Camera Module harness is open or shorted
Frontview Camera Module circuit poor electrical connection

How to Fix the DTC B1008 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for some 2014-2019 models with the B1008 code. The service bulletin recommends checking the windshield to ensure it is not aftermarket. Also, check for anything that may impair the front view camera and ensure the camera is properly mounted.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1008 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1008 2014 Chevrolet Silverado code?

Need more information on how to fix the B1008 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1008 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1008 2014 Chevrolet Silverado Code

1. What does OBDII code B1008 on a 2014 Chevrolet Silverado mean?

This code indicates that the calibration data for a specific component has not been programmed.

2. What are the common symptoms of OBDII code B1008 on a 2014 Chevrolet Silverado?

Common symptoms include malfunction indicator light (MIL) illumination, issues with specific systems or components, and potential drivability issues.

3. What could cause the OBDII code B1008 to trigger on a 2014 Chevrolet Silverado?

Possible causes include a faulty component, a software glitch, a disconnected or damaged sensor, or issues with the vehicle's computer system.

4. How can I diagnose the OBDII code B1008 on my 2014 Chevrolet Silverado?

Diagnosing this code typically involves using a scan tool to retrieve the specific details of the code, checking for any related symptoms or issues, and inspecting the relevant components for any visible damage.

5. What should I do if I get the OBDII code B1008 on my 2014 Chevrolet Silverado?

If you get this code, it's recommended to first check the specific component mentioned in the code description, inspect related wiring and connectors, and consider seeking professional help for further diagnosis and repairs.

6. Can I still drive my 2014 Chevrolet Silverado with the OBDII code B1008 present?

While it's possible to drive the vehicle with this code present, it's advisable to address the underlying issue promptly to prevent potential further damage and ensure optimal performance.

7. How can I reset the OBDII code B1008 on my 2014 Chevrolet Silverado?

Resetting the code typically involves using a scan tool to clear the code after addressing the underlying cause. However, if the issue is not resolved, the code may reappear.

8. Is it safe to ignore the OBDII code B1008 on my 2014 Chevrolet Silverado?

It's not recommended to ignore this code, as it could indicate an issue that may affect the vehicle's performance, emissions, or overall functionality. Addressing the problem promptly is advised.

9. Are there any common repair tips for fixing the OBDII code B1008 on a 2014 Chevrolet Silverado?

Common repair tips include checking and reprogramming the calibration data for the affected component, inspecting wiring connections, and ensuring all software updates are current.

10. Can a DIY enthusiast fix the OBDII code B1008 on a 2014 Chevrolet Silverado?

While some aspects of diagnosing and repairing this code may be within reach of a skilled DIY enthusiast, it's recommended to consult a professional mechanic or technician for accurate diagnosis and proper repair.