B1007 Nissan Code - Diagnosis Sensor Unit
Quick Answer
The Air Bag Diagnosis Sensor Unit detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air bag warning lamp in the combination meter. Common causes include Faulty Diagnosis Sensor Unit, Diagnosis Sensor Unit harness is open or shorted, Diagnosis Sensor Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1007 Nissan indicates Diagnosis Sensor Unit.
- Common causes
- Common causes include Faulty Diagnosis Sensor Unit, Diagnosis Sensor Unit harness is open or shorted, Diagnosis Sensor Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1007 Nissan Description
The Air Bag Diagnosis Sensor Unit contains the “G†sensors for both frontal and side collisions and spare battery function in case of main battery damaged in a collision.
What are the Possible Causes of the DTC B1007 Nissan?
- Faulty Diagnosis Sensor Unit
- Diagnosis Sensor Unit harness is open or shorted
- Diagnosis Sensor Unit circuit poor electrical connection
How to Fix the DTC B1007 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1007 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1007 Nissan code?
Need more information on how to fix the B1007 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1007 Nissan code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1007 Nissan Code
1. What are the common symptoms of OBDII code B1007 in a Nissan related to the Diagnosis Sensor Unit?
The common symptoms include airbag warning light illuminated on the dashboard and possible disabling of the airbag system.
2. What are the potential causes of OBDII code B1007 in a Nissan?
The code B1007 typically indicates a fault with the Diagnosis Sensor Unit itself or a related wiring issue.
3. How can I diagnose the Diagnosis Sensor Unit in a Nissan when facing OBDII code B1007?
Diagnosing the Diagnosis Sensor Unit involves using a professional OBDII scanner to retrieve the specific fault codes and checking the wiring connections for any signs of damage or corrosion.
4. Is it safe to drive my Nissan with OBDII code B1007 triggered?
It is not recommended to drive the vehicle with the B1007 code active, as it indicates a potential issue with the airbag system, which can compromise safety in the event of a collision.
5. Can I reset the OBDII code B1007 in my Nissan without addressing the underlying issue?
Resetting the code without fixing the root cause will only temporarily clear the warning light. The underlying issue with the Diagnosis Sensor Unit or wiring must be resolved to prevent the code from reappearing.
6. What are some repair tips for resolving OBDII code B1007 in a Nissan?
Repair tips include checking and repairing any damaged wiring, ensuring proper connection of the Diagnosis Sensor Unit, and seeking professional assistance if needed.
7. How much does it typically cost to repair OBDII code B1007 in a Nissan?
The cost of repairing OBDII code B1007 can vary depending on the exact cause of the issue, but it may involve expenses for parts replacement, wiring repairs, or professional diagnostic services.
8. Can a DIY enthusiast fix OBDII code B1007 in a Nissan, or is professional help recommended?
While some basic checks and repairs can be done by DIY enthusiasts, diagnosing and fixing complex issues related to the Diagnosis Sensor Unit may require professional expertise to ensure proper resolution and safety.
9. Are there any recalls or service bulletins related to OBDII code B1007 in Nissan vehicles?
It's recommended to check with Nissan dealership or service center for any relevant recalls or service bulletins related to OBDII code B1007 to see if the issue is covered under warranty or special campaigns.
10. How critical is it to address OBDII code B1007 in a timely manner for the safety of occupants in a Nissan vehicle?
Addressing OBDII code B1007 promptly is crucial for ensuring the proper functionality of the airbag system, which plays a vital role in occupant safety during potential accidents.
Discuss the causes and fixes for B1007 Nissan OBDII Code
Code B1007 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
