☰
AutoCodes.com | All About OBDII Engine Codes
Find a Shop |  Search Codes
AutoCodes - Infiniti - B1005 Infiniti

B1005 Infiniti Code - Diagnosis Sensor Unit

- Code Popularity: 3,193 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
What is this?
Table of contents
By AutoCodes.com - Updated Mar 11, 2021
Share on Facebook   Share on Twitter   Share on Linkedin
What does this mean?

|Code B1005 Infiniti Possible Causes

  • Faulty Diagnosis Sensor Unit
  • Diagnosis Sensor Unit harness is open or shorted
  • Diagnosis Sensor Unit circuit poor electrical connection

|How do I Fix the Code B1005 Infiniti?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Infiniti have Safety Recalls? → Check here

|What is the Cost to Diagnose the Code B1005 Infiniti?

Labor: 1.0

The cost of diagnosing the B1005 Infiniti code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are Code B1005 Infiniti Possible Symptoms?

  • Air Bag Warning Light ON

|Code B1005 Infiniti Description

The Air Bag Diagnosis Sensor Unit detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air bag warning lamp in the combination meter. The Air Bag Diagnosis Sensor Unit detects a shock that exceeds specified level and watches such systems as the driver and passenger air bag, side air bag, curtain air bag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly.
The Air Bag Diagnosis Sensor Unit contains the “G” sensors for both frontal and side collisions and spare battery function in case of main battery damaged in a collision.

OBDII Code B1005 Infiniti - Diagnosis Sensor Unit - AutoCodes.com
B1005 Infiniti Code - Diagnosis Sensor Unit
Search B1005 Infiniti Questions and Answers →

|Need More Information on the B1005 Infiniti Code?

Need more information on how to fix the B1005 Infiniti code? Get Access to Factory Service Manuals

|Need Help with the B1005 Infiniti Code?

Get the B1005 Infiniti code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

Related Information

|Code B1005 Infiniti comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1005 Infiniti code? Have you replaced any parts?
Any information is appreciated. Thanks