AutoCodes – Pontiac – B1001 Pontiac

B1001 Pontiac Code - SDM Option Configuration Error

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) stores the vehicle's restraint ID from the Vehicle Identification Number (VIN) and the last 4 digits of the SDM part number. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Passenger Presence System (PPS) (If equipped), Faulty Body Control Module (BCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1001 Pontiac indicates SDM Option Configuration Error.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Passenger Presence System (PPS) (If equipped), Faulty Body Control Module (BCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,300

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1001 Pontiac Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) stores the vehicle's restraint ID from the Vehicle Identification Number (VIN) and the last 4 digits of the SDM part number. When the ignition is turned ON, the SDM compares this information to the information stored in the Body Control Module (BCM) over the General Motors Local Area Network (GMLAN) communication circuit. If there is a mismatch between the information stored in the SDM and BCM, Diagnostic Trouble Code (DTC) B1001 will be set.

OBDII Code B1001 Pontiac - SDM Option Configuration Error - AutoCodes.com — B1001 Pontiac Code - SDM Option Configuration Error

What does this mean?

What are the Possible Causes of the DTC B1001 Pontiac?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Faulty Passenger Presence System (PPS) (If equipped)
Faulty Body Control Module (BCM)

How to Fix the DTC B1001 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When the B1001 is set on a device other than the Inflatable Restraint Sensing and Diagnostic Module (SDM), it means that the device is not configured properly.

B1001:00 Option Configuration Error
B1001:45 Option Configuration Error Variant Not Programmed
B1001:46 Option Configuration Error Configuration Not Programmed
B1001:4B Option Configuration Error Calibration Not Learned

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1001 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1001 Pontiac code?

Need more information on how to fix the B1001 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1001 Pontiac code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1001 Pontiac Code

1. What are the common symptoms of OBDII code B1001 Pontiac (SDM Option Configuration Error)?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's airbag system.

2. What are the possible causes of OBDII code B1001 Pontiac?

- The code B1001 Pontiac (SDM Option Configuration Error) can be caused by a malfunction in the Sensing and Diagnostic Module (SDM) or issues with the airbag system configuration.

3. How can I diagnose OBDII code B1001 Pontiac?

- Diagnosing OBDII code B1001 Pontiac requires using a professional OBDII scanner to retrieve the specific error code and then performing further diagnostics on the airbag system components.

4. Is it safe to drive with OBDII code B1001 Pontiac active?

- It is not recommended to drive with the airbag warning light illuminated, as it indicates a potential issue with the airbag system, which may compromise safety in the event of a collision.

5. Can I reset OBDII code B1001 Pontiac without fixing the underlying issue?

- While you can reset the OBDII code B1001 Pontiac temporarily, the issue causing the error code will likely persist and trigger the warning light again until properly diagnosed and repaired.

6. How can I repair OBDII code B1001 Pontiac (SDM Option Configuration Error)?

- Repairing OBDII code B1001 Pontiac typically involves diagnosing and fixing the underlying issue with the SDM or airbag system components, which may require professional assistance.

7. Will OBDII code B1001 Pontiac cause my airbags to not deploy in an accident?

- OBDII code B1001 Pontiac indicates a configuration error in the airbag system, which may affect the proper deployment of airbags in the event of a collision. It is important to address this issue promptly.

8. How much does it cost to repair OBDII code B1001 Pontiac?

- The cost of repairing OBDII code B1001 Pontiac can vary depending on the specific issue causing the error code, parts needed for replacement, and labor costs. It is recommended to obtain a professional diagnosis for an accurate estimate.

9. Are there any DIY repair tips for OBDII code B1001 Pontiac?

- DIY repair of OBDII code B1001 Pontiac is not recommended due to the complexity and safety implications of working on the airbag system. It is best to seek assistance from a qualified mechanic or dealership.

10. Can OBDII code B1001 Pontiac be a recurring issue?

- OBDII code B1001 Pontiac can be a recurring issue if the underlying problem with the SDM or airbag system configuration is not properly addressed and repaired. Regular maintenance and inspections can help prevent reoccurrences.