B1001 2014 GMC Sierra Code - SDM Option Configuration Error
Quick Answer
The Inflatable Restraint Sensing and Diagnostic Module (SDM) stores the vehicle's restraint ID from the Vehicle Identification Number (VIN) and the last 4 digits of the SDM part number. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Passenger Presence System (PPS) (If equipped), Faulty Body Control Module (BCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1001 2014 GMC Sierra indicates SDM Option Configuration Error.
- Common causes
- Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Faulty Passenger Presence System (PPS) (If equipped), Faulty Body Control Module (BCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1001 2014 GMC Sierra Description
What are the Possible Causes of the DTC B1001 2014 GMC Sierra?
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
- Faulty Passenger Presence System (PPS) (If equipped)
- Faulty Body Control Module (BCM)
How to Fix the DTC B1001 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1001:00 Option Configuration Error
B1001:45 Option Configuration Error Variant Not Programmed
B1001:46 Option Configuration Error Configuration Not Programmed
B1001:4B Option Configuration Error Calibration Not Learned
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1001 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1001 2014 GMC Sierra code?
Need more information on how to fix the B1001 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1001 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1001 2014 GMC Sierra Code
What does OBDII code B1001 mean for a 2014 GMC Sierra?
OBDII code B1001 indicates an SDM (Sensing and Diagnostic Module) option configuration error, which means there is a mismatch or issue with the settings or configuration of the airbag system.
What are the common symptoms of a B1001 code?
Common symptoms include the airbag warning light illuminating on the dashboard, possible issues with airbag deployment, and diagnostic trouble codes stored in the vehicle's computer.
What could cause the B1001 code to trigger?
Causes may include a malfunctioning SDM, incorrect configuration after repairs or modifications, a damaged wiring harness, or issues with the vehicle's airbag system components.
Can I drive my 2014 GMC Sierra with the B1001 code?
While it may be possible to drive the vehicle, it is not advisable as the airbag system may not function properly in the event of a crash, putting occupants at risk.
How can I diagnose the B1001 code?
To diagnose the B1001 code, use an OBDII scanner to retrieve the code and any related codes. Inspect the SDM connections, wiring, and configuration settings, and check for any recent repairs that may have affected the airbag system.
What repairs are typically needed to fix the B1001 code?
Repairs may involve reprogramming the SDM, repairing or replacing damaged wiring, or replacing the SDM if it is faulty. Clearing the code and resetting the system are also part of the process.
Is it safe to reset the B1001 code without repairs?
Resetting the code without addressing the underlying issue is not safe, as the airbag system may still be compromised, which can prevent airbags from deploying properly in an accident.
How much does it cost to fix the B1001 code?
Repair costs can vary widely depending on the specific issue, ranging from simple reprogramming costs (around $100-$200) to more extensive repairs or part replacements that can exceed $1,000.
Can a dealership help with the B1001 code?
Yes, a dealership can diagnose and repair the B1001 code effectively, as they have the specialized tools and knowledge required to work on the airbag system and SDM configuration.
Discuss the causes and fixes for B1001 2014 GMC Sierra OBDII Code
Code B1001 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
