B1000 RAM - A/C Switch Request Input Performance Or Incorrect Operation
B1000 RAM Possible Causes
- Faulty A/C Switch
- A/C Switch harness is open or shorted
- A/C Switch circuit poor electrical connection
- Faulty A/C Heater Control
How do I fix code B1000 RAM?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the B1000 RAM code
Labor: 1.0The cost of diagnosing the B1000 RAM code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1000 RAM DescriptionThe HVAC A/C Heater Control contains various switches and knobs that are used to change the systems operation. There are currently three types of switches used depending on the configuration of the system. Push button momentary switches which are normally open or in the Off position. Multifunction or rotary switches which have several distinct positions and potentiometers which are a rotary variable resistor that is used for a more precise control. An active Diagnostic Trouble Code (DTC) indicates that either a control switch or potentiometer is stuck in an On position or out of a calibrated range. A stored DTC indicates that control switch or potentiometer was stuck On or out of calibration but has since returned to its normal state.
More InformationNeed more information on how to fix the B1000 RAM code?
Get Access to Factory Service Manuals
Need more help?Get the B1000 Ram code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1000 Ram code? Have you replaced any parts?
Any information is appreciated. Thanks