B096A BUICK - Hazard Lamps Switch Backlight Circuit Short to Ground
B096A BUICK Possible Causes
- Faulty Hazard Lamps Switch
- Hazard Lamps Switch harness is open or shorted
- Hazard Lamps Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How do I fix code B096A BUICK
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B096A BUICK code
Labor: 1.0The cost of diagnosing the B096A BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
B096A BUICK Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B096a Buick DescriptionThe Body Control Module (BCM) supplies a voltage reference through the instrument panel cluster dimming voltage reference circuit to the instrument panel cluster lamps dimmer switch, which is part of the headlamp switch. When the dimmer switch is placed in a desired brightness position, reference voltage is applied through the dimmer switch rheostat and the cluster lamps dimmer switch signal circuit to the BCM. The BCM interprets this voltage signal, then applies a Pulse Width Modulated (PWM) voltage to the LED dimming supply circuit to all related interior lamps, illuminating them to the desired level of brightness.
B096A BUICK More InformationNeed more information on how to fix the B096A BUICK code?
Get Access to Factory Service Manuals
Need more help?Get the B096a Buick code diagnosed by a professional: Find a repair shop in your area
B096A BUICK CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B096a Buick code? Have you replaced any parts?
Any information is appreciated. Thanks