AutoCodes – GMC – B0961 2014 GMC Sierra

B0961 2014 GMC Sierra Code - Parking Assist Rear Sensor Right Corner Circuit

Quick Answer

The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. Common causes include Faulty Parking Assist Rear Sensor Right Corner, Parking Assist Rear Sensor Right Corner harness is open or shorted, Parking Assist Rear Sensor Right Corner circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B0961 2014 GMC Sierra indicates Parking Assist Rear Sensor Right Corner Circuit.
Common causes: Common causes include Faulty Parking Assist Rear Sensor Right Corner, Parking Assist Rear Sensor Right Corner harness is open or shorted, Parking Assist Rear Sensor Right Corner circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 257

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 02, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0961 2014 GMC Sierra Description

The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. The Parking Assist Control Module supplies 12 V to the parking assist sensors via the 12 V reference circuit and provides ground via the low reference circuit. The Parking Assist Control Module triggers the sensors in a sequential loop. After each sensor transmits, the Parking Assist Control Module uses the sensor echo received through the signal circuit to calculate the distance and position of an object. The Diagnostic Trouble Code (DTC) will be set when the Parking Aid Rear Sensor signal to the Parking Assist Control Module is out of specification.

OBDII Code B0961 2014 GMC Sierra - Parking Assist Rear Sensor Right Corner Circuit - AutoCodes.com — B0961 2014 GMC Sierra Code - Parking Assist Rear Sensor Right Corner Circuit

What does this mean?

What are the Possible Causes of the DTC B0961 2014 GMC Sierra?

Faulty Parking Assist Rear Sensor Right Corner
Parking Assist Rear Sensor Right Corner harness is open or shorted
Parking Assist Rear Sensor Right Corner circuit poor electrical connection
Faulty Parking Assist Control Module

How to Fix the DTC B0961 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0961:01 Parking Assist Rear Sensor Right Corner Circuit Short to Battery
B0961:02 Parking Assist Rear Sensor Right Corner Circuit Short to Ground
B0961:04 Parking Assist Rear Sensor Right Corner Circuit Open
B0961:06 Parking Assist Rear Sensor Right Corner Circuit Low Voltage/Open
B0961:08 Parking Assist Rear Sensor Right Corner Circuit Performance - Signal Invalid
B0961:18 Parking Assist Rear Sensor Right Corner Circuit Low Signal Amplitude
B0961:21 Parking Assist Rear Sensor Right Corner Circuit Incorrect Period
B0961:22 Parking Assist Rear Sensor Right Corner Circuit Too Short Low-Time
B0961:3A Parking Assist Rear Sensor Right Corner Circuit Incorrect Component Installed
B0961:3B Parking Assist Rear Sensor Right Corner Circuit Self-Test Malfunction

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0961 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0961 2014 GMC Sierra code?

Need more information on how to fix the B0961 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0961 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0961 2014 GMC Sierra Code

What does OBDII code B0961 mean for a 2014 GMC Sierra?

B0961 indicates a malfunction in the parking assist rear sensor circuit at the right corner, suggesting an issue with the sensor or its wiring.

What are common symptoms of the B0961 code?

Common symptoms include a malfunctioning parking assist system, warning lights on the dashboard, and inconsistent or no audio/visual alerts when reversing.

What could cause the B0961 code to trigger?

Causes may include a faulty right rear parking assist sensor, damaged wiring or connectors, or issues with the parking assist module itself.

How can I diagnose the B0961 code?

To diagnose B0961, visually inspect the wiring and connectors for damage, test the right rear sensor for proper operation, and check for other related trouble codes.

Is it safe to drive with the B0961 code?

While it may not affect driving safety directly, the parking assist feature will not function correctly, which could increase the risk of backing collisions.

What are some repair tips for fixing the B0961 code?

Start by checking the wiring and connectors for corrosion or breaks, replace the right rear sensor if it's faulty, and ensure all connections are secure.

Can I clear the B0961 code without fixing the issue?

Yes, you can clear the code with an OBDII scanner, but the issue will likely reappear if the underlying problem is not addressed.

Will replacing the right rear sensor always fix the B0961 code?

Not necessarily. While replacing the sensor can resolve the issue if it is faulty, other problems like wiring issues or module failures can also trigger the code.

How much might it cost to repair the B0961 code?

Repair costs can vary widely depending on whether you need to replace the sensor, repair wiring, or address module issues, typically ranging from $100 to $500.