B0961:18 Code - Parking Assist Rear Sensor Right Corner Circuit Low Signal Amplitude
Quick Answer
The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. Common causes include Faulty Parking Assist Rear Sensor Right Corner, Parking Assist Rear Sensor Right Corner harness is open or shorted, Parking Assist Rear Sensor Right Corner circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0961:18 indicates Parking Assist Rear Sensor Right Corner Circuit Low Signal Amplitude.
- Common causes
- Common causes include Faulty Parking Assist Rear Sensor Right Corner, Parking Assist Rear Sensor Right Corner harness is open or shorted, Parking Assist Rear Sensor Right Corner circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0961:18 Description
What are the Possible Causes of the DTC B0961:18?
- Faulty Parking Assist Rear Sensor Right Corner
- Parking Assist Rear Sensor Right Corner harness is open or shorted
- Parking Assist Rear Sensor Right Corner circuit poor electrical connection
- Faulty Parking Assist Control Module
How to Fix the DTC B0961:18?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0961:02 Parking Assist Rear Sensor Right Corner Circuit Short to Ground
B0961:04 Parking Assist Rear Sensor Right Corner Circuit Open
B0961:06 Parking Assist Rear Sensor Right Corner Circuit Low Voltage/Open
B0961:08 Parking Assist Rear Sensor Right Corner Circuit Performance - Signal Invalid
B0961:18 Parking Assist Rear Sensor Right Corner Circuit Low Signal Amplitude
B0961:21 Parking Assist Rear Sensor Right Corner Circuit Incorrect Period
B0961:22 Parking Assist Rear Sensor Right Corner Circuit Too Short Low-Time
B0961:3A Parking Assist Rear Sensor Right Corner Circuit Incorrect Component Installed
B0961:3B Parking Assist Rear Sensor Right Corner Circuit Self-Test Malfunction
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0961:18 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0961:18 code?
Need more information on how to fix the B0961:18 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0961:18 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0961:18 Code
1. What does the OBD-II code B0961:18 mean?
This code indicates a low signal amplitude in the circuit for the rear right corner parking assist sensor, suggesting an issue with the sensor or its wiring.
2. What are the common symptoms of code B0961:18?
Symptoms include malfunctioning parking assist, inaccurate or no feedback from the rear right corner sensor, and possible warning lights on the dashboard.
3. What causes code B0961:18 to appear?
Common causes include a faulty rear right corner parking sensor, damaged or corroded wiring, poor electrical connections, or issues with the parking assist module.
4. Can I still drive my vehicle with code B0961:18?
Yes, you can drive the vehicle, but the parking assist system may not function properly, increasing the risk of reversing accidents.
5. How do I diagnose the cause of code B0961:18?
Start by inspecting the sensor and its wiring for damage or corrosion, then use a diagnostic tool to check signal amplitude and connections to the parking assist module.
6. How can I fix code B0961:18?
Repair or replace the rear right corner parking sensor if faulty, repair damaged wiring, clean corroded connections, or replace the parking assist module if needed.
7. How much does it cost to repair code B0961:18?
Repairs can range from $50 to $300 depending on whether you need to replace the sensor, repair wiring, or address module issues.
8. Can a dirty parking sensor cause code B0961:18?
Yes, dirt or debris on the sensor can interfere with its signal and trigger the code. Cleaning the sensor may resolve the issue.
9. Does code B0961:18 require professional repair?
If the issue involves wiring or module replacement, professional help is recommended, though cleaning or replacing the sensor may be done by a skilled DIYer.
10. How can I prevent code B0961:18 from recurring?
Regularly inspect and clean parking sensors, ensure electrical connections are secure, and avoid damage to the rear bumper area.
Discuss the causes and fixes for B0961:18 OBDII Code
Code B0961:18 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
