B0960 2014 GMC Sierra Code - Parking Assist Rear Sensor Right Middle Circuit
Quick Answer
The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. Common causes include Faulty Parking Assist Rear Sensor Right Middle, Parking Assist Rear Sensor Right Middle harness is open or shorted, Parking Assist Rear Sensor Right Middle circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0960 2014 GMC Sierra indicates Parking Assist Rear Sensor Right Middle Circuit.
- Common causes
- Common causes include Faulty Parking Assist Rear Sensor Right Middle, Parking Assist Rear Sensor Right Middle harness is open or shorted, Parking Assist Rear Sensor Right Middle circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0960 2014 GMC Sierra Description
What are the Possible Causes of the DTC B0960 2014 GMC Sierra?
- Faulty Parking Assist Rear Sensor Right Middle
- Parking Assist Rear Sensor Right Middle harness is open or shorted
- Parking Assist Rear Sensor Right Middle circuit poor electrical connection
- Faulty Parking Assist Control Module
How to Fix the DTC B0960 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0960:02 Parking Assist Rear Sensor Right Middle Circuit Short to Ground
B0960:04 Parking Assist Rear Sensor Right Middle Circuit Open
B0960:06 Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
B0960:08 Parking Assist Rear Sensor Right Middle Circuit Performance - Signal Invalid
B0960:18 Parking Assist Rear Sensor Right Middle Circuit Low Signal Amplitude
B0960:21 Parking Assist Rear Sensor Right Middle Circuit Incorrect Period
B0960:22 Parking Assist Rear Sensor Right Middle Circuit Too Short Low-Time
B0960:3A Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
B0960:3B Parking Assist Rear Sensor Right Middle Circuit Self-Test Malfunction
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0960 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0960 2014 GMC Sierra code?
Need more information on how to fix the B0960 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0960 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0960 2014 GMC Sierra Code
What does the OBDII code B0960 mean for a 2014 GMC Sierra?
The B0960 code indicates a fault in the parking assist rear sensor right middle circuit, which may affect the vehicle's ability to detect obstacles behind it.
What are the common symptoms associated with the B0960 code?
Common symptoms include malfunctioning rear parking sensors, warning lights on the dashboard, and issues with the parking assist system not activating.
What could cause the B0960 code to trigger in a 2014 GMC Sierra?
Causes may include a faulty parking sensor, damaged wiring or connectors, or issues with the parking assist control module.
How can I diagnose the B0960 code in my GMC Sierra?
Start by visually inspecting the wiring and connectors associated with the right middle rear parking sensor. Use a multimeter to check for continuity and verify the sensor's operation.
Is it safe to drive with the B0960 code present?
While it may be safe to drive, the parking assist system will not function properly, which could increase the risk of accidents while reversing.
What repairs are typically needed to fix the B0960 code?
Repairs may involve replacing the faulty parking sensor, repairing damaged wiring, or reprogramming or replacing the parking assist control module.
Can I clear the B0960 code without fixing the issue?
Yes, you can clear the code using an OBDII scanner, but the underlying issue will likely cause the code to reappear.
How much does it typically cost to repair the B0960 code?
Repair costs can vary widely depending on the cause, but replacing a parking sensor may cost between $100 to $300, including parts and labor.
Are there any DIY tips for fixing the B0960 code?
Inspect the wiring and connectors for damage, clean any corrosion, and ensure the sensor is properly mounted. If the sensor is faulty, replacing it is usually straightforward.
What should I do if the B0960 code keeps coming back after repairs?
If the code persists, it may be necessary to perform a deeper diagnostic to check for issues with the parking assist control module or other related components.
Discuss the causes and fixes for B0960 2014 GMC Sierra OBDII Code
Code B0960 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
