B0960:3A Code - Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
Quick Answer
The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. Common causes include Faulty Parking Assist Rear Sensor Right Middle, Parking Assist Rear Sensor Right Middle harness is open or shorted, Parking Assist Rear Sensor Right Middle circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0960:3A indicates Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed.
- Common causes
- Common causes include Faulty Parking Assist Rear Sensor Right Middle, Parking Assist Rear Sensor Right Middle harness is open or shorted, Parking Assist Rear Sensor Right Middle circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0960:3A Description
What are the Possible Causes of the DTC B0960:3A?
- Faulty Parking Assist Rear Sensor Right Middle
- Parking Assist Rear Sensor Right Middle harness is open or shorted
- Parking Assist Rear Sensor Right Middle circuit poor electrical connection
- Faulty Parking Assist Control Module
How to Fix the DTC B0960:3A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0960:02 Parking Assist Rear Sensor Right Middle Circuit Short to Ground
B0960:04 Parking Assist Rear Sensor Right Middle Circuit Open
B0960:06 Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
B0960:08 Parking Assist Rear Sensor Right Middle Circuit Performance - Signal Invalid
B0960:18 Parking Assist Rear Sensor Right Middle Circuit Low Signal Amplitude
B0960:21 Parking Assist Rear Sensor Right Middle Circuit Incorrect Period
B0960:22 Parking Assist Rear Sensor Right Middle Circuit Too Short Low-Time
B0960:3A Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
B0960:3B Parking Assist Rear Sensor Right Middle Circuit Self-Test Malfunction
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0960:3A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0960:3A code?
Need more information on how to fix the B0960:3A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0960:3A code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0960:3A Code
1. What does the OBDII code B0960:3A mean?
It indicates an issue with the parking assist rear sensor for the right middle position, where an incorrect or incompatible component has been detected.
2. What are the common symptoms of code B0960:3A?
Symptoms may include the parking assist system not functioning, warning lights on the dashboard, or inaccurate distance detection when reversing.
3. What causes the B0960:3A code to appear?
This code is typically triggered by an improperly installed or incompatible parking sensor, damaged wiring, or a faulty sensor.
4. Can a faulty parking sensor trigger the B0960:3A code?
Yes, a defective or incompatible parking sensor can cause this code to appear.
5. How can I fix the B0960:3A code?
Inspect and replace the incorrect sensor with the correct one specified by the manufacturer. Check wiring and connections for damage or corrosion.
6. Is it safe to drive with the B0960:3A code active?
Yes, but the parking assist system may not function correctly, increasing the risk of collision during parking.
7. How can I determine if the sensor is incorrect or incompatible?
Compare the sensor's part number to the manufacturer’s specifications to ensure it matches the required component.
8. Can a software issue cause the B0960:3A code?
While rare, outdated or incorrect software in the vehicle’s control module could potentially misinterpret sensor data and trigger this code.
9. Do I need to recalibrate the parking assist system after replacing the sensor?
In many cases, yes. Recalibration may be necessary to ensure the system functions correctly with the new sensor.
10. Can I clear the B0960:3A code without fixing the issue?
You can clear the code temporarily, but it will likely return until the root cause is resolved.
Discuss the causes and fixes for B0960:3A OBDII Code
Code B0960:3A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
