AutoCodes.com | All About OBDII Engine Codes
AutoCodes - GMC - B094E GMC

B094E GMC Code - Right Side Object Detection Indicator Circuit

- Code Popularity: 985 Views
- Repair Importance Level: 1/3
- Repair Difficulty Level: 2/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

What are the Possible Causes of the DTC B094E GMC?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Faulty Right Side Object Detection Indicator
  • Right Side Object Detection Indicator harness is open or shorted
  • Right Side Object Detection Indicator circuit poor electrical connection
⚠ Does your GMC have Safety Recalls? → Check here

How to Fix the DTC B094E GMC?

Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

B094E 01 Right Side Object Detection Indicator Circuit Short to Battery
B094E 02 Right Side Object Detection Indicator Circuit Short to Ground

Search for B094E GMC Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B094E GMC code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

Code B094E GMC Description

The side blind zone alert system sensors are located behind the rear fascia and detect and report objects on either side of the vehicle, within a specified blind zone. The system alerts with a visual indicator placed on each side rear view mirror, to the presence of objects that may not be visible in the inside rearview mirror and outside rearview mirrors. When the system detects a vehicle in the side blind zone while driving forward, independent if passing a vehicle or being passed, the Left or Right Side Object Sensor will send a signal via serial data to the appropriate Door Lock/Window Switch. The Door Lock/Window switch supplies power and ground to the outside rearview mirror. When commanded via serial data, the Door Lock/window switch will provide voltage to the outside rear view mirror. The amber warning symbol will light up in the appropriate outside mirror. This indicates that it may be unsafe to change lanes. If the driver then activates the turn signal, the amber warning symbol starts flashing as an extra warning not to change lanes.
Side blind zone alert is active from speeds of 10 km/h (6.2 MPH) up to 140 km/h (87 MPH). Driving faster deactivates the system, indicated by low lighting warning symbols in the mirrors. Driving under this speed again will turn off the warning symbols. If then a vehicle is detected in blind zone, the warning symbols will illuminate normally on the appropriate side. When the vehicle is started, both outside mirror displays will briefly come on to indicate that the system is operating.

OBDII Code B094E GMC - Right Side Object Detection Indicator Circuit - AutoCodes.com
B094E GMC Code - Right Side Object Detection Indicator Circuit

Need More Information on the Code?

Need more information on how to fix the B094E GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B094E GMC code diagnosed by a professional: Find a repair shop in your area

Code B094E GMC comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B094E GMC code? Have you replaced any parts?
Any information is appreciated. Thanks