B094D Buick Code - Left Side Object Detection Indicator Circuit
Quick Answer
The side blind zone alert system sensors are located behind the rear fascia and detect and report objects on either side of the vehicle, within a specified blind zone. Common causes include Faulty Left Side Object Detection Indicator, Left Side Object Detection Indicator harness is open or shorted, Left Side Object Detection Indicator circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B094D Buick indicates Left Side Object Detection Indicator Circuit.
- Common causes
- Common causes include Faulty Left Side Object Detection Indicator, Left Side Object Detection Indicator harness is open or shorted, Left Side Object Detection Indicator circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B094D Buick Description
Side blind zone alert is active from speeds of 10 km/h (6.2 MPH) up to 140 km/h (87 MPH). Driving faster deactivates the system, indicated by low lighting warning symbols in the mirrors. Driving under this speed again will turn off the warning symbols. If then a vehicle is detected in blind zone, the warning symbols will illuminate normally on the appropriate side. When the vehicle is started, both outside mirror displays will briefly come on to indicate that the system is operating.
What are the Possible Causes of the DTC B094D Buick?
- Faulty Left Side Object Detection Indicator
- Left Side Object Detection Indicator harness is open or shorted
- Left Side Object Detection Indicator circuit poor electrical connection
How to Fix the DTC B094D Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B094D 02 Left Side Object Detection Indicator Circuit Short to Ground
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B094D Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B094D Buick code?
Need more information on how to fix the B094D Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B094D Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B094D Buick Code
1. What does the OBDII code B094D mean for a Buick?
The code B094D indicates an issue with the Left Side Object Detection Indicator Circuit, often related to the blind spot monitoring system.
2. What are the symptoms of the B094D code on a Buick?
Symptoms may include a malfunctioning or unresponsive left-side blind spot indicator, warning lights on the dashboard, or the blind spot system not functioning properly.
3. What causes the B094D code on a Buick?
Common causes include a faulty blind spot indicator light, wiring issues, poor electrical connections, or a malfunctioning object detection sensor.
4. Can I drive my Buick with the B094D code active?
Yes, but the blind spot monitoring system may not function correctly, potentially increasing the risk of accidents during lane changes.
5. How do I diagnose the B094D code on a Buick?
Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting the wiring and connections for damage, and testing the left-side object detection indicator and associated sensor.
6. How can I fix the B094D code on a Buick?
Repairs may involve replacing the faulty blind spot indicator light, repairing damaged wiring, or replacing the left-side object detection sensor.
7. How much does it cost to fix the B094D code on a Buick?
Repair costs vary but can range from $100 to $500 depending on whether the issue is related to wiring, the indicator light, or the sensor.
8. Can a software update resolve the B094D code on a Buick?
In some cases, a software update for the vehicle’s blind spot monitoring system may resolve the issue, but hardware faults typically require physical repairs.
9. Does the B094D code affect other safety systems?
The code generally impacts the blind spot monitoring system only and does not directly affect other safety features like airbags or braking systems.
10. How can I prevent the B094D code from occurring on my Buick?
Regular maintenance of the blind spot monitoring system, including checking wiring connections and keeping sensors clean, can help prevent this code.
Discuss the causes and fixes for B094D Buick OBDII Code
Code B094D Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.