B094B Code - Left Side Object Detection Control Module
Quick Answer
The side object sensor, Left or Right Side Object Sensor, can set this code if the module determines there is a fault when the Left Side Object Sensor is not to factory specifications. Common causes include Faulty Left Side Object Detection Control Module, Left Side Object Detection Control Module harness is open or shorted, Left Side Object Detection Control Module circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B094B indicates Left Side Object Detection Control Module.
- Common causes
- Common causes include Faulty Left Side Object Detection Control Module, Left Side Object Detection Control Module harness is open or shorted, Left Side Object Detection Control Module circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B094B Description
What are the Possible Causes of the DTC B094B?
- Faulty Left Side Object Detection Control Module
- Left Side Object Detection Control Module harness is open or shorted
- Left Side Object Detection Control Module circuit poor electrical connection
How to Fix the DTC B094B?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B094B 08 Left Side Object Detection Control Module - Performance - Signal Invalid
B094B 45 Left Side Object Detection Control Module - Variant Not Programmed
B094B 54 Left Side Object Detection Control Module - High Temperature
B094B 58 Left Side Object Detection Control Module - Performance
If DTC B094B 58 or B094C 58 is set, check for anything that can interfere with the radar signal. Verify area in front of radar is clean of mud, ice, snow, etc. Also verify the fascia panels in front of the radar are damage-free and not obstructed by any add-on accessories such as emblems, etc.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B094B code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B094B code?
Need more information on how to fix the B094B code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B094B code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B094B Buick — Left Side Object Detection Control Module
- B094B Cadillac — Left Side Object Detection Control Module
- B094B Chevrolet — Left Side Object Detection Control Module
- B094B GMC — Left Side Object Detection Control Module
Frequently Asked Questions about B094B Code
1. What does the OBDII code B094B mean?
The B094B code indicates a fault in the Left Side Object Detection Control Module, often related to issues with detecting objects or vehicles on the left side of the car.
2. What are the symptoms of the B094B code?
Symptoms may include malfunctioning blind spot monitoring, warning lights on the dashboard, or error messages related to the left-side object detection system.
3. What causes the B094B code to appear?
Common causes include wiring issues, a faulty Left Side Object Detection Control Module, sensor misalignment, or software glitches.
4. Can I drive with the B094B code active?
Yes, but the vehicle’s blind spot monitoring or object detection system may not function properly, which could increase the risk of accidents.
5. How do I diagnose the B094B code?
Start by scanning the vehicle with an OBDII diagnostic tool, inspecting the wiring and connectors for damage, and checking the Left Side Object Detection Control Module for proper operation.
6. How is the B094B code fixed?
Repairs may include replacing the faulty control module, repairing or replacing damaged wiring, or recalibrating the system.
7. How much does it cost to fix the B094B code?
Repair costs can range from $150 to $600, depending on whether the module needs replacement or if there are wiring issues.
8. Can the B094B code be caused by software issues?
Yes, outdated or corrupted software in the control module can trigger the B094B code and may require a software update.
9. What tools are needed to fix the B094B code?
You’ll need an OBDII scanner, a multimeter for checking wiring, and possibly special tools for module replacement or system recalibration.
10. Is the B094B code specific to certain vehicle brands?
No, but it is more common in vehicles equipped with advanced driver assistance systems (ADAS), such as blind spot monitoring. Always refer to your vehicle’s service manual for specifics.
Discuss the causes and fixes for B094B OBDII Code
Code B094B comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
