B0936 PONTIAC - Coolant Level Sensor Circuit Malfunction
B0936 PONTIAC Possible Causes
- Low Coolant Level
- Faulty Low Coolant Switch
- Coolant Low Switch harness is open or shorted
- Coolant Low Switch circuit poor electrical connection
First diagnose B0936 PONTIAC code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B0936 PONTIAC code
Labor: 1.0The cost of diagnosing the B0936 PONTIAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
B0936 PONTIAC Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B0936 Pontiac DescriptionThe P0936 Diagnostic Trouble Code (DTC) sets when the ignition switch is in RUN position and coolant level is low. No voltage on the wire between Body Control Module (BCM) and low Coolant Switch for more than 30 seconds.
B0936 PONTIAC More InformationNeed more information on how to fix the B0936 PONTIAC code?
Get Access to Factory Service Manuals
Need more help?Get the B0936 Pontiac code diagnosed by a professional: Find a repair shop in your area
B0936 PONTIAC CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B0936 Pontiac code? Have you replaced any parts?
Any information is appreciated. Thanks