B0785 Buick Code - Two Wheel Drive High Range Indicator Circuit
Quick Answer
The Two Wheel Drive (2WD) High Range (HI) indicator circuit consists of a Light Emitting Diode (LED) feed circuit, an LED, and an LED control circuit. Common causes include Faulty Transfer Case Select Switch, Transfer Case Select Switch harness is open or shorted, Transfer Case Select Switch circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B0785 Buick indicates Two Wheel Drive High Range Indicator Circuit.
- Common causes
- Common causes include Faulty Transfer Case Select Switch, Transfer Case Select Switch harness is open or shorted, Transfer Case Select Switch circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B0785 Buick Description
The TCCM tests the 2WD HI indicator circuit for unexpected voltage by monitoring the B+ supplied by the BCM on the indicator dimming control circuit by grounding the 2WD HI indicator control circuit for 2 seconds during the Bulb Test at key ON.
What are the Possible Causes of the DTC B0785 Buick?
- Faulty Transfer Case Select Switch
- Transfer Case Select Switch harness is open or shorted
- Transfer Case Select Switch circuit poor electrical connection
- Faulty Transfer Case Shift Control Module (TCCM)
How to Fix the DTC B0785 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0785 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0785 Buick code?
Need more information on how to fix the B0785 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0785 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0785 Buick Code
1. What does the OBDII code B0785 indicate in a Buick?
The code B0785 indicates a fault in the Two Wheel Drive High Range Indicator Circuit. This typically means there is an issue with the circuit that controls the indicator light or message for the high range mode in two-wheel drive vehicles.
2. What are common symptoms of the B0785 code in a Buick?
Common symptoms include the two-wheel drive high range indicator light not functioning correctly, the indicator light staying on or off regardless of the actual mode, or possible messages on the dashboard display not reflecting the actual gear position.
3. What can cause the B0785 code to appear in a Buick?
Causes can range from a simple blown fuse, faulty wiring or connections in the indicator circuit, a bad switch, or a malfunctioning transmission range sensor.
4. How can I diagnose the B0785 code in my Buick?
Diagnosis typically involves using a diagnostic scanner to read the fault codes and monitor live data. Checking the condition and connections of the wiring and switches related to the two-wheel drive high range indicator circuit is also crucial.
5. What are the steps to fix the B0785 code in a Buick?
Repair steps may include replacing or repairing damaged wires or connectors, replacing a faulty switch or sensor, and checking or replacing fuses. After repairs, clear the code with an OBDII scanner and test drive the vehicle to ensure the issue is resolved.
6. Is it safe to drive a Buick with the B0785 code?
While the vehicle may still be drivable, the incorrect indicator information might lead to confusion about which drive mode the vehicle is in, which could affect driving conditions or decisions. It is advisable to address the issue promptly.
7. Will the B0785 code clear on its own if the issue is resolved?
Usually, once the underlying issue is fixed, the code needs to be manually cleared using an OBDII scanner. However, some vehicles may have systems that automatically recheck and clear codes if the fault does not reoccur over a series of drive cycles.
8. Does the B0785 code impact the transmission operation of a Buick?
Directly, this code does not affect the transmission operation; however, it is related to the drive mode indication. It's essential to ensure the vehicle is actually operating in the intended drive mode despite what the indicator might incorrectly display.
9. Could a B0785 code result from electrical problems elsewhere in the vehicle?
Yes, broader electrical issues such as voltage irregularities or issues with the vehicle’s central computer systems could potentially cause this code along with other unrelated codes.
10. What tools are necessary to diagnose and repair the B0785 code in a Buick?
Tools needed may include a diagnostic OBDII scanner, a multimeter for testing wires and electrical continuity, and basic hand tools for accessing and replacing components of the indicator circuit.
Discuss the causes and fixes for B0785 Buick OBDII Code
Code B0785 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
