AutoCodes - OBDII Code List - B0775
B0775 - Four Wheel Drive High Range Indicator Circuit
Table of contents
Share:
B0775 Possible Causes
- Faulty Transfer Case Select Switch
- Transfer Case Select Switch harness is open or shorted
- Transfer Case Select Switch circuit poor electrical connection
- Faulty Transfer Case Shift Control Module
How do I fix code B0775?
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B0775 code
Labor: 1.0
The cost of diagnosing the B0775 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B0775 Description
The Four Wheel Drive High Range (4HI) indicator circuit consists of an LED dimming supply circuit and a 4HI indicator control circuit. When the 4HI mode is selected, current is supplied to the 4HI indicator by the LED dimming supply circuit, traveling through the 4HI indicator LEDs, at which time the transfer case shift control module supplies the ground through the 4HI indicator control circuit.
More Information
Need more information on how to fix the B0775 code?Get Access to Factory Service Manuals
Information for specific makes
- B0775 BUICK Four Wheel Drive High Range Indicator Circuit
- B0775 CADILLAC Four Wheel Drive High Range Indicator Circuit
- B0775 CHEVROLET Four Wheel Drive High Range Indicator Circuit
- B0775 GMC Four Wheel Drive High Range Indicator Circuit
Comments
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B0775 code? Have you replaced any parts?Any information is appreciated. Thanks