AutoCodes – Buick – B067F Buick

B067F Buick Code - Passenger Air Bag On Indicator Circuit

Quick Answer

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B067F Buick indicates Passenger Air Bag On Indicator Circuit.
Common causes: Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 910

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 16, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067F Buick Description

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. When the Inflatable Restraint Sensing and Diagnostic Module (SDM) receives the appropriate serial data message from the passenger presence module (if equipped) the inflatable restraint sensing and diagnostic module will then provide voltage to the appropriate indicator. When air bag disable switch (if equipped) has been switched to either OFF or ON, the corresponding air bag indicator will be illuminated by the inflatable restraint sensing and diagnostic module. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.

OBDII Code B067F Buick - Passenger Air Bag On Indicator Circuit - AutoCodes.com — B067F Buick Code - Passenger Air Bag On Indicator Circuit

What does this mean?

What are the Possible Causes of the DTC B067F Buick?

Faulty Passenger Air Bag Disable Indicator
Passenger Air Bag Disable Indicator harness is open or shorted
Passenger Air Bag Disable Indicator circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067F Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B067F:01 Passenger Air Bag On Indicator Circuit Short to Battery
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067F Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067F Buick code?

Need more information on how to fix the B067F Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067F Buick code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067F Buick Code

1. What are the common symptoms of OBDII code B067F in a Buick related to the Passenger Air Bag On Indicator Circuit?

The common symptoms include the passenger airbag warning light staying illuminated or flickering on the dashboard.

2. What could be the possible causes of OBDII code B067F in a Buick?

Possible causes may include a faulty passenger airbag indicator module, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.

3. How can I diagnose the issue causing OBDII code B067F in my Buick?

You can diagnose the issue by using an OBDII scanner to read the code, inspecting the wiring and connectors in the passenger airbag system, and testing the components for proper functionality.

4. Can I still drive my Buick if OBDII code B067F related to the Passenger Air Bag On Indicator Circuit is active?

It is not recommended to drive the vehicle with an active airbag-related fault code, as it may compromise the safety of the airbag system in case of an accident.

5. How can I reset OBDII code B067F in a Buick after repairing the underlying issue?

After repairing the issue causing the code, you can reset the code using an OBDII scanner or by disconnecting the car battery for a few minutes to clear the fault code.

6. Is it safe to attempt repairing OBDII code B067F in a Buick by myself?

If you have experience working with automotive electrical systems and airbag components, you may attempt the repair. However, it is recommended to consult a professional if you are unsure or uncomfortable with the task.

7. Are there any common DIY repair tips for fixing OBDII code B067F in a Buick?

Common DIY repair tips include checking and securing the wiring connections in the airbag system, inspecting for any visible damage, and ensuring all components are properly seated.

8. How important is it to address OBDII code B067F in a Buick promptly?

It is crucial to address the issue promptly, as any fault in the airbag system can compromise the effectiveness of the airbags in case of an accident, potentially putting the occupants at risk.

9. Can OBDII code B067F in a Buick be triggered by a loose connection or a temporary issue?

Yes, a loose connection or a temporary issue in the passenger airbag indicator circuit can trigger the B067F code. It is important to investigate and address the problem to prevent it from recurring.

10. What should I do if OBDII code B067F persists in my Buick even after repairs?

If the B067F code persists after repairs, it is recommended to have the vehicle inspected by a professional technician who can conduct a more in-depth diagnosis to identify any underlying issues that may have been overlooked.