AutoCodes – Chevrolet – B067F 2018 Chevrolet Silverado

B067F 2018 Chevrolet Silverado Code - Passenger Air Bag On Indicator Circuit

Quick Answer

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B067F 2018 Chevrolet Silverado indicates Passenger Air Bag On Indicator Circuit.
Common causes: Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 326

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 16, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067F 2018 Chevrolet Silverado Description

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. When the Inflatable Restraint Sensing and Diagnostic Module (SDM) receives the appropriate serial data message from the passenger presence module (if equipped) the inflatable restraint sensing and diagnostic module will then provide voltage to the appropriate indicator. When air bag disable switch (if equipped) has been switched to either OFF or ON, the corresponding air bag indicator will be illuminated by the inflatable restraint sensing and diagnostic module. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.

OBDII Code B067F 2018 Chevrolet Silverado - Passenger Air Bag On Indicator Circuit - AutoCodes.com — B067F 2018 Chevrolet Silverado Code - Passenger Air Bag On Indicator Circuit

What does this mean?

What are the Possible Causes of the DTC B067F 2018 Chevrolet Silverado?

Faulty Passenger Air Bag Disable Indicator
Passenger Air Bag Disable Indicator harness is open or shorted
Passenger Air Bag Disable Indicator circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067F 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B067F:01 Passenger Air Bag On Indicator Circuit Short to Battery
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067F 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067F 2018 Chevrolet Silverado code?

Need more information on how to fix the B067F 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067F 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067F 2018 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code B067F in a 2018 Chevrolet Silverado?

The common symptoms of code B067F include the passenger airbag warning light staying on or flashing on the dashboard.

2. What are the possible causes of OBDII code B067F in a 2018 Chevrolet Silverado?

Possible causes of code B067F can include a faulty passenger airbag sensor, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.

3. How serious is OBDII code B067F in a 2018 Chevrolet Silverado?

Code B067F should be taken seriously, as it indicates a potential issue with the passenger airbag system, which is a critical safety feature in the vehicle.

4. Can I continue driving my 2018 Chevrolet Silverado with OBDII code B067F?

It is not recommended to drive the vehicle with an active B067F code, as it may compromise the proper functioning of the passenger airbag system.

5. How can I diagnose OBDII code B067F in a 2018 Chevrolet Silverado?

Diagnosing code B067F typically involves using a diagnostic scanner to retrieve the specific fault codes, followed by inspecting the passenger airbag system components for any visible damage or issues.

6. What are some repair tips for fixing OBDII code B067F in a 2018 Chevrolet Silverado?

Repair tips for addressing code B067F may include checking and repairing any damaged wiring or connectors, replacing the faulty passenger airbag sensor, or resetting the airbag control module.

7. Can I reset OBDII code B067F in a 2018 Chevrolet Silverado on my own?

While you can attempt to reset the code using a diagnostic scanner, it is important to diagnose and address the underlying issue causing the code to prevent it from reoccurring.

8. Will fixing OBDII code B067F in a 2018 Chevrolet Silverado require professional assistance?

Depending on the root cause of the code, fixing B067F may require professional assistance from a qualified mechanic with experience in diagnosing and repairing airbag system issues.

9. How much does it cost to repair OBDII code B067F in a 2018 Chevrolet Silverado?

The cost of repairing code B067F can vary depending on the specific issue causing the code and the labor rates of the repair shop. It is recommended to obtain estimates from multiple sources.

10. Is OBDII code B067F covered under warranty for a 2018 Chevrolet Silverado?

If your vehicle is still under warranty, the repair for code B067F may be covered, depending on the terms of the warranty and the specific cause of the issue. It is advisable to check with your dealership for warranty coverage details.