B067F 2015 GMC Sierra Code - Passenger Air Bag On Indicator Circuit
Quick Answer
The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067F 2015 GMC Sierra indicates Passenger Air Bag On Indicator Circuit.
- Common causes
- Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B067F 2015 GMC Sierra Description
What are the Possible Causes of the DTC B067F 2015 GMC Sierra?
- Faulty Passenger Air Bag Disable Indicator
- Passenger Air Bag Disable Indicator harness is open or shorted
- Passenger Air Bag Disable Indicator circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B067F 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B067F 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B067F 2015 GMC Sierra code?
Need more information on how to fix the B067F 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067F 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067F 2015 GMC Sierra Code
1. What does the OBDII code B067F mean on a 2015 GMC Sierra?
This code indicates an issue with the Passenger Air Bag On Indicator Circuit, which is part of the airbag system.
2. What are the common symptoms of code B067F in a GMC Sierra?
Symptoms may include the passenger airbag indicator not illuminating, staying on constantly, or malfunctioning, and possibly an illuminated airbag warning light on the dashboard.
3. What causes the B067F code to appear?
Common causes include a faulty passenger airbag indicator bulb, damaged wiring or connectors in the circuit, or a malfunctioning passenger presence system module.
4. Can I still drive my GMC Sierra with the B067F code?
Yes, but the airbag system may not function properly, which could compromise passenger safety in a collision.
5. How can I diagnose the B067F code?
Use an OBDII scanner to confirm the code, then visually inspect the passenger airbag indicator, wiring, and connectors for damage or loose connections.
6. What is the first step to fix the B067F code?
Start by checking the passenger airbag indicator bulb to ensure it’s functioning properly and replace it if necessary.
7. Can a blown fuse cause the B067F code?
Yes, a blown fuse related to the airbag system or indicator circuit can trigger this code, so check and replace any faulty fuses.
8. How much does it cost to repair the B067F code on a 2015 GMC Sierra?
Repair costs vary depending on the issue, ranging from $50 for a bulb replacement to several hundred dollars if the module or wiring needs repair.
9. Does the B067F code affect the deployment of airbags?
It could, as a malfunction in the indicator circuit sometimes signals broader airbag system issues. Have the system inspected promptly.
10. Can a software update fix the B067F code?
In some cases, a software update for the passenger presence system module may resolve communication or calibration issues causing the code.
Discuss the causes and fixes for B067F 2015 GMC Sierra OBDII Code
Code B067F 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
