AutoCodes – GMC – B067F 2014 GMC Sierra

B067F 2014 GMC Sierra Code - Passenger Air Bag On Indicator Circuit

Quick Answer

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B067F 2014 GMC Sierra indicates Passenger Air Bag On Indicator Circuit.
Common causes: Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 266

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 16, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067F 2014 GMC Sierra Description

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. When the Inflatable Restraint Sensing and Diagnostic Module (SDM) receives the appropriate serial data message from the passenger presence module (if equipped) the inflatable restraint sensing and diagnostic module will then provide voltage to the appropriate indicator. When air bag disable switch (if equipped) has been switched to either OFF or ON, the corresponding air bag indicator will be illuminated by the inflatable restraint sensing and diagnostic module. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.

OBDII Code B067F 2014 GMC Sierra - Passenger Air Bag On Indicator Circuit - AutoCodes.com — B067F 2014 GMC Sierra Code - Passenger Air Bag On Indicator Circuit

What does this mean?

What are the Possible Causes of the DTC B067F 2014 GMC Sierra?

Faulty Passenger Air Bag Disable Indicator
Passenger Air Bag Disable Indicator harness is open or shorted
Passenger Air Bag Disable Indicator circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067F 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B067F:01 Passenger Air Bag On Indicator Circuit Short to Battery
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067F 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067F 2014 GMC Sierra code?

Need more information on how to fix the B067F 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067F 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067F 2014 GMC Sierra Code

1. What are the common symptoms of OBDII code B067F in a 2014 GMC Sierra?

The common symptoms include the passenger airbag "On" indicator not illuminating or staying on when the system is activated.

2. What could cause the OBDII code B067F in a 2014 GMC Sierra?

The code B067F is typically triggered by a malfunction in the passenger airbag on/off indicator circuit, which may be due to a faulty indicator light, wiring issues, or a defective sensor.

3. How can I diagnose the cause of OBDII code B067F in my 2014 GMC Sierra?

Diagnosing the issue involves checking the wiring connections, inspecting the indicator light for any damage, and using a diagnostic scanner to pinpoint the exact location of the fault in the circuit.

4. Can I still drive my 2014 GMC Sierra with the OBDII code B067F present?

It is generally safe to drive the vehicle with this code, but it is crucial to have the passenger airbag system inspected and repaired promptly to ensure it functions correctly in case of an accident.

5. Is it possible to reset the OBDII code B067F in a 2014 GMC Sierra without fixing the underlying issue?

While you can clear the code temporarily with an OBDII scanner, it will likely reappear until the root cause of the problem is identified and repaired.

6. How much does it typically cost to repair OBDII code B067F in a 2014 GMC Sierra?

The cost of repairing this code can vary depending on the exact cause of the issue, but it may involve replacing the indicator light, repairing damaged wiring, or addressing sensor malfunctions.

7. Can a DIY enthusiast fix OBDII code B067F in a 2014 GMC Sierra?

While some basic troubleshooting steps can be taken by a DIY enthusiast, diagnosing and repairing the specific circuit issue related to the passenger airbag system may require specialized knowledge and tools best handled by a professional technician.

8. Will OBDII code B067F cause the passenger airbag to malfunction in a 2014 GMC Sierra?

While the code itself may not affect the functionality of the passenger airbag, it indicates a potential issue in the indicator circuit that, if left unresolved, could impact the proper operation of the airbag system.

9. How long does it typically take to repair OBDII code B067F in a 2014 GMC Sierra?

The repair time can vary depending on the complexity of the issue and the availability of parts, but a skilled technician can usually diagnose and fix the problem within a few hours to a day.

10. Are there any safety concerns associated with OBDII code B067F in a 2014 GMC Sierra?

While the immediate safety risk may be low, it is essential to address any potential malfunctions in the passenger airbag system promptly to ensure it functions as intended in the event of a collision.