AutoCodes – Chevrolet – B067F 2014 Chevrolet Silverado

B067F 2014 Chevrolet Silverado Code - Passenger Air Bag On Indicator Circuit

Quick Answer

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B067F 2014 Chevrolet Silverado indicates Passenger Air Bag On Indicator Circuit.
Common causes: Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 244

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 16, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067F 2014 Chevrolet Silverado Description

The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. When the Inflatable Restraint Sensing and Diagnostic Module (SDM) receives the appropriate serial data message from the passenger presence module (if equipped) the inflatable restraint sensing and diagnostic module will then provide voltage to the appropriate indicator. When air bag disable switch (if equipped) has been switched to either OFF or ON, the corresponding air bag indicator will be illuminated by the inflatable restraint sensing and diagnostic module. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.

OBDII Code B067F 2014 Chevrolet Silverado - Passenger Air Bag On Indicator Circuit - AutoCodes.com — B067F 2014 Chevrolet Silverado Code - Passenger Air Bag On Indicator Circuit

What does this mean?

What are the Possible Causes of the DTC B067F 2014 Chevrolet Silverado?

Faulty Passenger Air Bag Disable Indicator
Passenger Air Bag Disable Indicator harness is open or shorted
Passenger Air Bag Disable Indicator circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067F 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B067F:01 Passenger Air Bag On Indicator Circuit Short to Battery
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067F 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067F 2014 Chevrolet Silverado code?

Need more information on how to fix the B067F 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067F 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067F 2014 Chevrolet Silverado Code

1. What does the OBDII code B067F for a 2014 Chevrolet Silverado mean?

The code B067F indicates a problem with the Passenger Air Bag On Indicator Circuit in a 2014 Chevrolet Silverado.

2. What are the common symptoms of the B067F OBDII code in a 2014 Chevrolet Silverado?

Common symptoms include the passenger airbag indicator not illuminating or staying on when it should be off.

3. What are the possible causes of the B067F OBDII code in a 2014 Chevrolet Silverado?

Possible causes include a faulty passenger airbag indicator module, wiring issues, or a malfunction in the airbag system.

4. How can I diagnose the B067F OBDII code in my 2014 Chevrolet Silverado?

Diagnosis typically involves checking the wiring connections, inspecting the indicator module, and using a scan tool to retrieve and clear the code.

5. Can I continue driving my 2014 Chevrolet Silverado with the B067F OBDII code?

It is not recommended to drive the vehicle with unresolved airbag issues, as it may compromise passenger safety in the event of an accident.

6. How can I repair the Passenger Air Bag On Indicator Circuit issue in my 2014 Chevrolet Silverado?

Repair options include replacing the passenger airbag indicator module, repairing any damaged wiring, or addressing any underlying airbag system malfunctions.

7. Will resetting the OBDII code B067F in my 2014 Chevrolet Silverado fix the issue?

Resetting the code may temporarily turn off the warning light, but it will not address the root cause of the problem. Proper diagnosis and repair are necessary.

8. How much does it typically cost to repair the B067F OBDII code in a 2014 Chevrolet Silverado?

The cost of repair can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

9. Can I fix the Passenger Air Bag On Indicator Circuit problem in my 2014 Chevrolet Silverado myself?

While some DIY enthusiasts may be able to address simple wiring issues, it is recommended to consult a professional technician for accurate diagnosis and repair of airbag system problems.

10. Are there any recalls or technical service bulletins related to the B067F OBDII code in a 2014 Chevrolet Silverado?

It is advisable to check with a Chevrolet dealership or online resources for any relevant recalls or technical service bulletins related to the B067F code in a 2014 Silverado.