B067F:04 Code - Passenger Air Bag On Indicator Circuit Open
Quick Answer
The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067F:04 indicates Passenger Air Bag On Indicator Circuit Open.
- Common causes
- Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B067F:04 Description
What are the Possible Causes of the DTC B067F:04?
- Faulty Passenger Air Bag Disable Indicator
- Passenger Air Bag Disable Indicator harness is open or shorted
- Passenger Air Bag Disable Indicator circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B067F:04?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B067F:04 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B067F:04 code?
Need more information on how to fix the B067F:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067F:04 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067F:04 Code
1. What does OBDII code B067F:04 mean?
B067F:04 indicates an open circuit in the passenger airbag "ON" indicator, meaning the system cannot properly detect or illuminate the indicator.
2. What are the symptoms of code B067F:04?
Common symptoms include the passenger airbag "ON" indicator not lighting up, intermittent operation of the indicator, or the airbag warning light illuminated on the dashboard.
3. What causes code B067F:04 to appear?
This code is typically caused by a damaged or disconnected wiring harness, a faulty passenger airbag indicator bulb, a defective indicator module, or a poor connection at the related connector.
4. Can I still drive with code B067F:04 active?
Yes, but it’s not recommended. The passenger airbag system may not function as intended, which could compromise safety in the event of a collision.
5. How do I diagnose code B067F:04?
Start by inspecting the wiring and connectors for damage or loose connections. Use a multimeter to check for continuity in the circuit and verify the functionality of the passenger airbag "ON" indicator.
6. What tools are needed to fix code B067F:04?
You’ll typically need a multimeter, a scan tool capable of reading airbag codes, and possibly replacement parts, such as a new indicator bulb or wiring harness.
7. How much does it cost to repair code B067F:04?
Repair costs vary depending on the issue. Fixing a loose connector may be free, while replacing the indicator module or repairing wiring could cost $100-$300 or more.
8. Can a blown fuse cause code B067F:04?
Yes, a blown fuse in the passenger airbag indicator circuit could disrupt power and trigger the code. Check the fuse box and replace any faulty fuses.
9. Will clearing the code fix B067F:04 permanently?
No, clearing the code without addressing the underlying issue will only temporarily remove the code. The problem must be fixed to prevent the code from returning.
10. Can I fix code B067F:04 myself?
If you’re comfortable working with electrical systems, you may be able to fix it yourself by repairing damaged wiring or replacing the indicator bulb. However, for complex issues, professional assistance is recommended.
Discuss the causes and fixes for B067F:04 OBDII Code
Code B067F:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
