B067F:01 Code - Passenger Air Bag On Indicator Circuit Short to Battery
Quick Answer
The passenger air bag ON/OFF indicators are used to notify the driver when the passenger presence system has enabled or disabled the passenger instrument panel air bag. Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067F:01 indicates Passenger Air Bag On Indicator Circuit Short to Battery.
- Common causes
- Common causes include Faulty Passenger Air Bag Disable Indicator, Passenger Air Bag Disable Indicator harness is open or shorted, Passenger Air Bag Disable Indicator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B067F:01 Description
What are the Possible Causes of the DTC B067F:01?
- Faulty Passenger Air Bag Disable Indicator
- Passenger Air Bag Disable Indicator harness is open or shorted
- Passenger Air Bag Disable Indicator circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B067F:01?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B067F:02 Passenger Air Bag On Indicator Circuit Short to Ground
B067F:04 Passenger Air Bag On Indicator Circuit Open
B067F:05 Passenger Air Bag On Indicator Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B067F:01 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B067F:01 code?
Need more information on how to fix the B067F:01 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067F:01 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067F:01 Code
What does the OBDII code B067F:01 mean?
B067F:01 indicates a short to battery in the passenger airbag on indicator circuit, which may disrupt the operation of the airbag system.
What are the common symptoms of code B067F:01?
Symptoms include the passenger airbag indicator not functioning, airbag warning light illuminated, and potential inactivation of the airbag system.
What causes the B067F:01 code to appear?
Common causes include damaged wiring, a short circuit, a faulty passenger airbag indicator, or issues with the airbag control module.
Can a short to battery in the circuit affect airbag deployment?
Yes, a short to battery can interfere with proper airbag operation, potentially preventing deployment during an accident.
How can I troubleshoot the passenger airbag indicator circuit?
Inspect the wiring for damage or shorts, check the passenger airbag indicator for faults, and test the airbag control module for errors.
Is it safe to drive with the B067F:01 code present?
No, it’s unsafe because the airbag system may not function properly in the event of a collision.
How do you repair the issue causing code B067F:01?
Repairs include replacing damaged wiring, repairing the short circuit, replacing the faulty passenger airbag indicator, or addressing issues in the airbag control module.
Can a weak battery cause the B067F:01 code?
While unlikely, voltage fluctuations from a weak battery can sometimes cause electrical issues that might trigger this code.
How much does it cost to fix the B067F:01 code?
Repair costs depend on the exact issue but typically range from $100 to $500 for wiring repairs or indicator replacement.
Do I need a professional to fix the B067F:01 code?
Yes, due to the complexity and safety-critical nature of the airbag system, it’s recommended to have a qualified technician handle the repair.
Discuss the causes and fixes for B067F:01 OBDII Code
Code B067F:01 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
