AutoCodesChevrolet – B067A 2018 Chevrolet Silverado

B067A 2018 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Quick Answer

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B067A 2018 Chevrolet Silverado indicates Rollover Protection OFF Indicator Circuit.
Common causes
Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 334
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 16, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067A 2018 Chevrolet Silverado Description

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.
OBDII Code B067A 2018 Chevrolet Silverado - Rollover Protection OFF Indicator Circuit - AutoCodes.com
B067A 2018 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

What are the Possible Causes of the DTC B067A 2018 Chevrolet Silverado?

  • Faulty Rollover Protection OFF Indicator
  • Rollover Protection OFF Indicator harness is open or shorted
  • Rollover Protection OFF Indicator circuit poor electrical connection
  • Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067A 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067A 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067A 2018 Chevrolet Silverado code?

Need more information on how to fix the B067A 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2018 Chevrolet Silverado Code

1. What does OBDII code B067A on a 2018 Chevrolet Silverado mean?

The B067A code indicates a malfunction in the Rollover Protection OFF Indicator Circuit.

2. What are the common symptoms of OBDII code B067A on a 2018 Chevrolet Silverado?

Common symptoms include the Rollover Protection OFF indicator not illuminating when it should or staying on when it shouldn't.

3. What are the potential causes of OBDII code B067A on a 2018 Chevrolet Silverado?

Possible causes include a faulty indicator switch, wiring issues, a defective indicator cluster, or a problem with the vehicle's computer system.

4. How serious is OBDII code B067A on a 2018 Chevrolet Silverado?

While this code may not affect the vehicle's drivability, it is important to address it promptly as it relates to the vehicle's safety features.

5. Can I continue driving my 2018 Chevrolet Silverado with the Rollover Protection OFF Indicator Circuit issue?

It is recommended to have the issue diagnosed and repaired as soon as possible to ensure the proper functioning of safety features in your vehicle.

6. How can I diagnose OBDII code B067A on a 2018 Chevrolet Silverado?

Diagnosis typically involves using a scan tool to retrieve the trouble code and then inspecting the indicator circuit components for any visible damage or issues.

7. How can I repair OBDII code B067A on a 2018 Chevrolet Silverado?

Repair methods may include replacing the faulty indicator switch, repairing damaged wiring, or addressing any issues with the indicator cluster or vehicle's computer system.

8. Can I reset OBDII code B067A on a 2018 Chevrolet Silverado with a simple reset tool?

While you can attempt to clear the code with a reset tool, it is important to address the underlying issue causing the code for a proper repair.

9. Will OBDII code B067A on a 2018 Chevrolet Silverado cause a check engine light to illuminate?

The B067A code may not always trigger the check engine light, so it's essential to use an OBDII scanner to retrieve and address the specific trouble code.

10. Is it recommended to seek professional help for OBDII code B067A on a 2018 Chevrolet Silverado?

For proper diagnosis and repair of the Rollover Protection OFF Indicator Circuit issue, it is advisable to consult a qualified mechanic or dealership familiar with Chevrolet vehicles.

Discuss the causes and fixes for B067A 2018 Chevrolet Silverado OBDII Code

Code B067A 2018 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play