AutoCodes – GMC – B067A 2017 GMC Sierra

B067A 2017 GMC Sierra Code - Rollover Protection OFF Indicator Circuit

Quick Answer

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B067A 2017 GMC Sierra indicates Rollover Protection OFF Indicator Circuit.
Common causes: Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 181

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 16, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067A 2017 GMC Sierra Description

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.

OBDII Code B067A 2017 GMC Sierra - Rollover Protection OFF Indicator Circuit - AutoCodes.com — B067A 2017 GMC Sierra Code - Rollover Protection OFF Indicator Circuit

What does this mean?

What are the Possible Causes of the DTC B067A 2017 GMC Sierra?

Faulty Rollover Protection OFF Indicator
Rollover Protection OFF Indicator harness is open or shorted
Rollover Protection OFF Indicator circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067A 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B067A:01 Rollover Protection OFF Indicator Circuit Short to Battery
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067A 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067A 2017 GMC Sierra code?

Need more information on how to fix the B067A 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2017 GMC Sierra Code

1. What are the common symptoms of OBDII code B067A in a 2017 GMC Sierra?

The common symptoms include the Rollover Protection OFF indicator staying illuminated on the dashboard and a potential malfunction in the vehicle's rollover protection system.

2. What does the OBDII code B067A indicate in a 2017 GMC Sierra?

OBDII code B067A indicates a malfunction in the Rollover Protection OFF indicator circuit in the vehicle, signaling a potential issue with the rollover protection system.

3. What are some possible causes of OBDII code B067A in a 2017 GMC Sierra?

Possible causes of this code include a faulty rollover protection OFF indicator switch, damaged wiring or connectors in the circuit, or an issue with the rollover protection module itself.

4. How can I diagnose the Rollover Protection OFF Indicator Circuit issue in my 2017 GMC Sierra?

Diagnosing the problem involves using an OBDII scanner to retrieve the specific trouble code, inspecting the indicator switch and its wiring for damage, and testing the rollover protection system components for proper functionality.

5. Can I continue driving my 2017 GMC Sierra with the Rollover Protection OFF Indicator Circuit issue?

It is not recommended to continue driving the vehicle with this issue, as the rollover protection system may not function correctly in the event of a rollover accident, potentially putting occupants at risk.

6. How can I repair the Rollover Protection OFF Indicator Circuit problem in my 2017 GMC Sierra?

Repairing the issue may involve replacing the faulty indicator switch, repairing damaged wiring or connectors, or addressing any underlying issues with the rollover protection system components as needed.

7. Is it possible to reset the OBDII code B067A in a 2017 GMC Sierra without fixing the underlying problem?

While you can clear the trouble code with an OBDII scanner, it is crucial to address the root cause of the issue to ensure the proper functioning of the rollover protection system.

8. Can the Rollover Protection OFF Indicator Circuit problem in a 2017 GMC Sierra be fixed at home?

Depending on your technical skills and access to tools, you may be able to address the issue at home by replacing the indicator switch or repairing wiring. However, complex system diagnostics may require professional assistance.

9. How can I prevent the Rollover Protection OFF Indicator Circuit issue from occurring in my 2017 GMC Sierra in the future?

Regularly inspecting the indicator switch, maintaining the vehicle's electrical system, and promptly addressing any warning lights or system malfunctions can help prevent issues with the rollover protection circuit.

10. Does fixing the Rollover Protection OFF Indicator Circuit problem require specialized equipment for a 2017 GMC Sierra?

While basic tools may be sufficient for some repairs, diagnosing and fixing complex electrical issues like this may benefit from specialized diagnostic equipment and technical expertise, especially for ensuring the proper functioning of the rollover protection system.