AutoCodes – GMC – B067A 2016 GMC Sierra

B067A 2016 GMC Sierra Code - Rollover Protection OFF Indicator Circuit

Quick Answer

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B067A 2016 GMC Sierra indicates Rollover Protection OFF Indicator Circuit.
Common causes: Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 174

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 16, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067A 2016 GMC Sierra Description

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.

OBDII Code B067A 2016 GMC Sierra - Rollover Protection OFF Indicator Circuit - AutoCodes.com — B067A 2016 GMC Sierra Code - Rollover Protection OFF Indicator Circuit

What does this mean?

What are the Possible Causes of the DTC B067A 2016 GMC Sierra?

Faulty Rollover Protection OFF Indicator
Rollover Protection OFF Indicator harness is open or shorted
Rollover Protection OFF Indicator circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067A 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B067A:01 Rollover Protection OFF Indicator Circuit Short to Battery
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067A 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067A 2016 GMC Sierra code?

Need more information on how to fix the B067A 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2016 GMC Sierra Code

1. What does the OBDII code B067A for the Rollover Protection OFF Indicator Circuit in a 2016 GMC Sierra mean?

This code indicates an issue with the circuit responsible for the Rollover Protection OFF indicator in your GMC Sierra.

2. What are the common symptoms of OBDII code B067A in a 2016 GMC Sierra?

Common symptoms may include the Rollover Protection OFF indicator not illuminating properly or staying on when it shouldn't.

3. What are the possible causes of OBDII code B067A in a 2016 GMC Sierra?

Potential causes include a faulty indicator circuit, damaged wiring, a defective indicator light, or a problem with the vehicle's computer system.

4. How can I diagnose the OBDII code B067A in my 2016 GMC Sierra?

Diagnosis typically involves inspecting the indicator circuit, checking the wiring for any damage, testing the indicator light, and using a diagnostic scanner to retrieve and clear the code.

5. Can I continue driving my 2016 GMC Sierra with the Rollover Protection OFF Indicator Circuit issue?

It is recommended not to ignore this issue, as it may impact the proper functioning of the rollover protection system. It is advisable to address the problem promptly.

6. How can I repair OBDII code B067A in my 2016 GMC Sierra?

Repair options may include repairing or replacing the indicator circuit, fixing any damaged wiring, replacing the indicator light, or reprogramming the vehicle's computer system.

7. Will resetting the OBDII code B067A in my 2016 GMC Sierra make the issue go away?

Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem causing the Rollover Protection OFF Indicator Circuit issue.

8. Is it necessary to visit a mechanic for OBDII code B067A in my 2016 GMC Sierra?

While some DIY enthusiasts may attempt to diagnose and repair this issue themselves, consulting a qualified mechanic is recommended for an accurate diagnosis and proper repair.

9. How much does it typically cost to repair the Rollover Protection OFF Indicator Circuit issue in a 2016 GMC Sierra?

The cost of repair can vary based on the exact cause of the problem, the labor rates in your area, and whether any parts need to be replaced. It's best to get a few quotes from different mechanics.

10. How often does the Rollover Protection OFF Indicator Circuit issue occur in a 2016 GMC Sierra?

While it is not extremely common, issues with indicator circuits can arise due to various factors. Regular maintenance and prompt attention to warning lights can help prevent such problems.