AutoCodesChevrolet – B067A 2015 Chevrolet Silverado

B067A 2015 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Quick Answer

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B067A 2015 Chevrolet Silverado indicates Rollover Protection OFF Indicator Circuit.
Common causes
Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 304
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 16, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067A 2015 Chevrolet Silverado Description

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.
OBDII Code B067A 2015 Chevrolet Silverado - Rollover Protection OFF Indicator Circuit - AutoCodes.com
B067A 2015 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

What are the Possible Causes of the DTC B067A 2015 Chevrolet Silverado?

  • Faulty Rollover Protection OFF Indicator
  • Rollover Protection OFF Indicator harness is open or shorted
  • Rollover Protection OFF Indicator circuit poor electrical connection
  • Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067A 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067A 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067A 2015 Chevrolet Silverado code?

Need more information on how to fix the B067A 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2015 Chevrolet Silverado Code

1. What does the OBDII code B067A for a 2015 Chevrolet Silverado indicate?

The code B067A in a 2015 Chevrolet Silverado refers to the Rollover Protection OFF Indicator Circuit issue.

2. What are the common symptoms of the Rollover Protection OFF Indicator Circuit problem in a 2015 Chevrolet Silverado?

Common symptoms include the rollover protection indicator light staying on or not functioning properly.

3. What can cause the B067A OBDII code to trigger in a 2015 Chevrolet Silverado?

Possible causes include a faulty rollover protection sensor, wiring issues, or a malfunctioning indicator circuit.

4. How serious is the Rollover Protection OFF Indicator Circuit problem in a 2015 Chevrolet Silverado?

While it may not directly affect the vehicle's drivability, it is important for safety reasons as the indicator provides crucial information about the rollover protection system's status.

5. What should I do if the Rollover Protection OFF Indicator Circuit code appears in my 2015 Chevrolet Silverado?

It is recommended to have the vehicle diagnosed by a qualified mechanic to pinpoint the exact cause of the issue.

6. Can I continue driving my 2015 Chevrolet Silverado with the Rollover Protection OFF Indicator Circuit problem?

It is not advisable to ignore the issue, as it may compromise the effectiveness of the rollover protection system in case of an accident. Seek professional help to address the problem.

7. How can the Rollover Protection OFF Indicator Circuit problem in a 2015 Chevrolet Silverado be repaired?

Repair methods may vary depending on the root cause, but typically involve diagnosing the sensor, checking the wiring, and repairing or replacing any faulty components.

8. Is resetting the OBDII code B067A in a 2015 Chevrolet Silverado a temporary solution?

Resetting the code without addressing the underlying issue is not recommended, as the problem may persist and potentially compromise the vehicle's safety features.

9. Can a DIY enthusiast fix the Rollover Protection OFF Indicator Circuit problem in a 2015 Chevrolet Silverado?

While some basic troubleshooting steps can be taken, diagnosing and repairing this specific issue may require specialized equipment and expertise best handled by a professional mechanic.

10. How can I prevent the Rollover Protection OFF Indicator Circuit issue in my 2015 Chevrolet Silverado?

Regular maintenance checks, including inspecting the rollover protection system components, can help identify potential problems early and prevent the occurrence of the B067A OBDII code.

Discuss the causes and fixes for B067A 2015 Chevrolet Silverado OBDII Code

Code B067A 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play