B067A 2014 GMC Sierra Code - Rollover Protection OFF Indicator Circuit
Quick Answer
If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067A 2014 GMC Sierra indicates Rollover Protection OFF Indicator Circuit.
- Common causes
- Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B067A 2014 GMC Sierra Description
What are the Possible Causes of the DTC B067A 2014 GMC Sierra?
- Faulty Rollover Protection OFF Indicator
- Rollover Protection OFF Indicator harness is open or shorted
- Rollover Protection OFF Indicator circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B067A 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B067A 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B067A 2014 GMC Sierra code?
Need more information on how to fix the B067A 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067A 2014 GMC Sierra Code
1. What does OBDII code B067A for a 2014 GMC Sierra mean?
The B067A code indicates a fault in the Rollover Protection OFF Indicator Circuit in a 2014 GMC Sierra.
2. What are the common symptoms of OBDII code B067A in a 2014 GMC Sierra?
Common symptoms of code B067A may include the rollover protection OFF indicator not functioning properly or displaying incorrect information on the dashboard.
3. What are the possible causes of OBDII code B067A in a 2014 GMC Sierra?
Possible causes of code B067A in a 2014 GMC Sierra include a faulty rollover protection OFF indicator switch, damaged wiring or connectors in the circuit, or a malfunctioning control module.
4. How can I diagnose OBDII code B067A in my 2014 GMC Sierra?
Diagnosing code B067A may involve using a diagnostic scanner to retrieve the specific fault code, inspecting the rollover protection OFF indicator circuit for any visible damage, and testing the components within the circuit for proper functionality.
5. Is it safe to drive my 2014 GMC Sierra with OBDII code B067A active?
It is generally safe to drive the vehicle with code B067A, but it is recommended to address the issue promptly to ensure the proper functioning of the rollover protection system.
6. Can I repair OBDII code B067A in my 2014 GMC Sierra myself?
Repairing code B067A may require basic knowledge of automotive electrical systems. If you are comfortable working with wiring and components, you may be able to address the issue yourself by replacing the faulty parts or repairing damaged wiring.
7. How much does it typically cost to repair OBDII code B067A in a 2014 GMC Sierra?
The cost of repairing code B067A can vary depending on the underlying cause of the issue. Replacing a faulty switch or repairing damaged wiring may cost between $100 to $300 at a dealership or repair shop.
8. Will resetting the OBDII system clear code B067A in my 2014 GMC Sierra?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It is best to diagnose and repair the root cause of the problem.
9. How urgent is it to address OBDII code B067A in a 2014 GMC Sierra?
While code B067A may not cause immediate drivability issues, it is important to address the problem in a timely manner to ensure the proper operation of the rollover protection system in case of an emergency.
10. Can code B067A in a 2014 GMC Sierra cause other problems if left unresolved?
If left unresolved, code B067A may lead to potential issues with the rollover protection system, affecting its ability to provide accurate information or warnings in the event of a rollover situation.
Discuss the causes and fixes for B067A 2014 GMC Sierra OBDII Code
Code B067A 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
