AutoCodesChevrolet – B067A 2014 Chevrolet Silverado

B067A 2014 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

Quick Answer

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B067A 2014 Chevrolet Silverado indicates Rollover Protection OFF Indicator Circuit.
Common causes
Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 266
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 16, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B067A 2014 Chevrolet Silverado Description

If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. The Diagnostic Trouble Code (DTC) will be set when the Inflatable Restraint Sensing and Diagnostic Module detects improper voltage on the control circuit of the indicator.
OBDII Code B067A 2014 Chevrolet Silverado - Rollover Protection OFF Indicator Circuit - AutoCodes.com
B067A 2014 Chevrolet Silverado Code - Rollover Protection OFF Indicator Circuit

What are the Possible Causes of the DTC B067A 2014 Chevrolet Silverado?

  • Faulty Rollover Protection OFF Indicator
  • Rollover Protection OFF Indicator harness is open or shorted
  • Rollover Protection OFF Indicator circuit poor electrical connection
  • Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B067A 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B067A 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B067A 2014 Chevrolet Silverado code?

Need more information on how to fix the B067A 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B067A 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B067A 2014 Chevrolet Silverado Code

1. What does OBDII code B067A on a 2014 Chevrolet Silverado mean?

The B067A code indicates a problem with the Rollover Protection OFF Indicator Circuit in the vehicle.

2. What are the common symptoms of OBDII code B067A in a 2014 Chevrolet Silverado?

Common symptoms include the Rollover Protection OFF indicator light staying illuminated or flashing on the dashboard.

3. What are possible causes of OBDII code B067A in a 2014 Chevrolet Silverado?

Potential causes of this code include a faulty rollover sensor, damaged wiring or connectors in the indicator circuit, or a malfunctioning control module.

4. How serious is OBDII code B067A on a 2014 Chevrolet Silverado?

While the code itself may not affect the vehicle's drivability, it indicates a potential issue with the rollover protection system that could compromise safety in the event of an accident.

5. How can I diagnose OBDII code B067A in my 2014 Chevrolet Silverado?

Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific fault codes, inspecting the rollover sensor and related components, and testing the wiring for continuity and proper voltage.

6. Can I still drive my 2014 Chevrolet Silverado with OBDII code B067A present?

It is generally not recommended to drive the vehicle with this code active, as it may indicate a safety-related issue with the rollover protection system.

7. How can I repair OBDII code B067A on a 2014 Chevrolet Silverado?

Repairing this code may involve replacing a faulty rollover sensor, repairing damaged wiring or connectors, or reprogramming the control module to address the issue.

8. Can I reset OBDII code B067A on my 2014 Chevrolet Silverado without fixing the underlying issue?

While you can clear the code with a diagnostic scanner, it is important to address the root cause of the problem to ensure the proper functioning of the rollover protection system.

9. Is OBDII code B067A covered under warranty for a 2014 Chevrolet Silverado?

The coverage of this code under warranty may vary depending on the specific terms of your vehicle's warranty and the cause of the issue.

10. How much does it cost to fix OBDII code B067A in a 2014 Chevrolet Silverado?

The cost of fixing this code can vary based on the extent of the issue, the required repairs or replacements, and labor costs at a repair shop.

Discuss the causes and fixes for B067A 2014 Chevrolet Silverado OBDII Code

Code B067A 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play