B067A:02 Code - Rollover Protection OFF Indicator Circuit Short to Ground
Quick Answer
If the vehicle is equipped with a rollover protection disable switch, when pressed and held, will disable rollover protection and the inflatable restraint sensing and diagnostic module will illuminate the rollover protection disabled indicator. Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B067A:02 indicates Rollover Protection OFF Indicator Circuit Short to Ground.
- Common causes
- Common causes include Faulty Rollover Protection OFF Indicator, Rollover Protection OFF Indicator harness is open or shorted, Rollover Protection OFF Indicator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B067A:02 Description
What are the Possible Causes of the DTC B067A:02?
- Faulty Rollover Protection OFF Indicator
- Rollover Protection OFF Indicator harness is open or shorted
- Rollover Protection OFF Indicator circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B067A:02?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B067A:02 Rollover Protection OFF Indicator Circuit Short to Ground
B067A:04 Rollover Protection OFF Indicator Circuit Open
B067A:05 Rollover Protection OFF Indicator Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B067A:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B067A:02 code?
Need more information on how to fix the B067A:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B067A:02 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B067A:02 Code
1. What does the OBDII code B067A:02 mean?
The code B067A:02 indicates a "Rollover Protection OFF Indicator Circuit Short to Ground," meaning there is an electrical short in the circuit that controls the rollover protection off indicator.
2. What are the common symptoms of code B067A:02?
Symptoms include the rollover protection off light not working, staying on constantly, or flickering, along with possible warning messages on the dashboard.
3. What causes the B067A:02 code to appear?
The code is typically caused by a damaged or shorted wiring harness, a faulty rollover protection off indicator bulb or LED, or a malfunctioning control module.
4. Can I continue driving with the B067A:02 code?
While the vehicle may still be drivable, the rollover protection system might not function as intended, which could compromise safety in the event of a rollover.
5. How is the B067A:02 code diagnosed?
A technician will inspect the circuit for damaged or shorted wires, test the indicator light or LED for proper operation, and check the associated control module for faults.
6. What repairs can fix the B067A:02 code?
Repairs may include replacing damaged wiring, repairing short circuits, replacing the indicator light or LED, or reprogramming or replacing the control module.
7. How much does it cost to fix a B067A:02 code?
Repair costs vary depending on the specific issue but can range from $50 to $200 for wiring repairs or light replacement, and up to $500 or more for control module replacement.
8. Can I reset the B067A:02 code without fixing the issue?
Clearing the code with a scan tool may temporarily remove it, but the issue will likely return if the underlying problem is not addressed.
9. Is the B067A:02 code specific to any vehicle makes or models?
This code can appear on various vehicles equipped with a rollover protection system, but diagnosis and repair procedures may vary by manufacturer.
10. What tools are needed to diagnose the B067A:02 code?
Common diagnostic tools include an OBDII scanner, a multimeter for testing circuits, and wiring diagrams specific to the vehicle model.
Discuss the causes and fixes for B067A:02 OBDII Code
Code B067A:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
