B0441 GMC - Left Air Temperature Actuator
B0441 GMC Possible Causes
- Faulty Left Air Temperature Actuator
- Left Air Temperature Actuator harness is open or shorted
- Left Air Temperature Actuator circuit poor electrical connection
- Faulty Auxiliary Heating and Cooling Systems (HVAC) Control Module
How do I fix code B0441 GMC?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the B0441 GMC code
Labor: 1.0The cost of diagnosing the B0441 GMC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B0441 GMC DescriptionThe Heating, Ventilation, and Air Conditioning (HVAC) Control Module commands the left air temperature actuator movement with one of three voltage signals applied to the left air temperature door control circuit. A low voltage of zero volts moves the left air temperature door toward full cold. A voltage of 2.5 volts stops the door. A voltage of 5 volts moves the left air temperature door toward full hot. The HVAC control module determines the current position of the actuator by monitoring the feedback voltage of the left air temperature door position signal circuit. The feedback potentiometer position is a function of the actuator position. A high voltage indicates a full cold left air temperature door position. A low voltage indicates a full hot left air temperature door position. The HVAC control module controls the left air temperature door position in order to maintain the selected air temperature.
Whenever the HVAC control module keep alive memory battery power is interrupted, the HVAC control module will perform a recalibration of the actuators. During recalibration, the HVAC control module will drive the actuators to their minimum and maximum travel extremes. The HVAC control module will then calculate a travel range from this data and compare it to a calibrated range within the HVAC control module. If the actual travel range is not within the calibrated expected range, the actuator will be considered not calibrated and the DTC will set.
More InformationNeed more information on how to fix the B0441 GMC code?
Get Access to Factory Service Manuals
Need more help?Get the B0441 Gmc code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B0441 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks