| All About OBDII Engine Codes
AutoCodes - Buick - B0423 BUICK

B0423 BUICK Code - Temperature Control 2 Feedback

Updated Mar 11, 2021
- Code Popularity: 3,591 Views
- Repair Importance Level: 1/3
- Repair Difficulty Level: 2/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

|B0423 BUICK code possible causes

  • Faulty Passenger Air Temperature Actuator
  • Passenger Air Temperature Actuator harness is open or shorted
  • Passenger Air Temperature Actuator circuit poor electrical connection

|How do I fix code B0423 BUICK code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|B0423 BUICK code tech notes

DTC B0423 02 - Temperature Control 2 Feedback Circuit Short to Ground
DTC B0423 05 - Temperature Control 2 Feedback Circuit Short to Battery or Open
DTC B0423 61 - Temperature Control 2 Circuit Actuator Stuck

|Cost of diagnosing B0423 BUICK code

Labor: 1.0

The cost of diagnosing the B0423 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are B0423 BUICK code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B0423 BUICK code description

The Heating, Ventilation, and Air Conditioning (HVAC) control module controls the HVAC door actuators to regulate the airflow through the HVAC system. Each actuator consists of an electric motor and a potentiometer. The module supplies a low reference and 5-volt reference source voltage to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. When the actuator shaft rotates, the voltage on the door position signal circuit changes. The control circuit uses either a 0, 2.5 or 5-volt signal to command the actuator movement. When the actuator is at rest, the control circuit value is 2.5 volts. A 0 or 5-volt control signal commands the actuator movement in opposite directions.

OBDII Code B0423 Buick - Temperature Control 2 Feedback -
Temperature Control 2 Feedback

|Need more information with the B0423 BUICK code?

Need more information on how to fix the B0423 BUICK code?
Get Access to Factory Service Manuals

|Need help with a B0423 BUICK code?

Get the B0423 Buick code diagnosed by a professional: Find a repair shop in your area

|B0423 BUICK code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B0423 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks