| All About OBDII Engine Codes
AutoCodes - Gmc - B0413 GMC

B0413 GMC Code - Main Temperature Control Feedback Circuit

- Code Popularity: 14,955 Views
- Repair Importance Level: 1/3
- Repair Difficulty Level: 2/3
Table of contents
By - Updated Jul 25, 2022
Share on Facebook   Share on Twitter   Share on Linkedin

|B0413 GMC code possible causes

  • Faulty Drivers Air Temperature Actuator
  • Drivers Air Temperature Actuator harness is open or shorted
  • Drivers Air Temperature Actuator circuit poor electrical connection

|How do I fix code B0413 GMC code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your car have Safety Recalls? → Check here

|B0413 GMC code tech notes

B0413:02 Main Temperature Control Feedback Circuit Short to Ground
B0413:05 Main Temperature Control Feedback Circuit Short to Battery or Open
B0413:61 Main Temperature Control Feedback Circuit Actuator Stuck Open

|Cost of diagnosing B0413 GMC code

Labor: 1.0

The cost of diagnosing the B0413 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are B0413 GMC code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B0413 GMC code description

The Heating, Ventilation, and Air Conditioning (HVAC) control module controls the HVAC door actuators to regulate the airflow through the HVAC system. Each actuator consists of an electric motor and a potentiometer. The module supplies a low reference and 5-volt reference source voltage to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. When the actuator shaft rotates, the voltage on the door position signal circuit changes. The control circuit uses either a 0, 2.5, or 5-volt signal to command the actuator movement. When the actuator is at rest, the control circuit value is 2.5 volts. A 0 or 5-volt control signal commands the actuator movement in opposite directions.

OBDII Code b0413 gmc - Main Temperature Control Feedback Circuit -
B0413 GMC Code - Main Temperature Control Feedback Circuit

|Need more information with the B0413 GMC code?

Need more information on how to fix the B0413 GMC code? Get Access to Factory Service Manuals

|Need help with a B0413 GMC code?

Get the b0413 gmc code diagnosed by a professional: Find a repair shop in your area

|B0413 GMC code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the b0413 gmc code? Have you replaced any parts?
Any information is appreciated. Thanks