B0197 GMC Code - Front Blower Motor Speed Circuit Open
Quick Answer
The Heating, Ventilation, and Air Conditioning (HVAC) Control Module monitors the Front Blower Motor. Common causes include Faulty Front Blower Motor, Front Blower Motor harness is open or shorted, Front Blower Motor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0197 GMC indicates Front Blower Motor Speed Circuit Open.
- Common causes
- Common causes include Faulty Front Blower Motor, Front Blower Motor harness is open or shorted, Front Blower Motor circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0197 GMC Description
What are the Possible Causes of the DTC B0197 GMC?
- Faulty Front Blower Motor
- Front Blower Motor harness is open or shorted
- Front Blower Motor circuit poor electrical connection
How to Fix the DTC B0197 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0197 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0197 GMC code?
Need more information on how to fix the B0197 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0197 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0197 GMC Code
1. What does the OBDII code B0197 on a GMC mean?
B0197 indicates an issue with the front blower motor speed circuit, specifically an open circuit or disconnection preventing proper communication or operation.
2. What are the common symptoms of the B0197 code in a GMC vehicle?
Symptoms may include the front blower motor not functioning, limited or no airflow from the HVAC system, or inability to adjust fan speeds.
3. What causes the B0197 code to appear?
Common causes include a damaged or disconnected blower motor resistor, faulty wiring or connectors, or a malfunctioning blower motor.
4. How do I diagnose the B0197 code in my GMC?
Start by inspecting the blower motor, resistor, and wiring for visible damage or disconnection. Use a multimeter to check for continuity or power at the blower motor circuit.
5. Can I drive my GMC with the B0197 code active?
Yes, you can drive the vehicle, but the HVAC system may not function properly, leading to discomfort or issues with defrosting windows.
6. How do I fix the B0197 code on my GMC?
Repairs may include replacing a damaged blower motor resistor, repairing or replacing faulty wiring, or replacing the blower motor itself if it’s defective.
7. How much does it cost to repair the B0197 code on a GMC?
Repair costs vary depending on the issue but typically range from $100 to $400, depending on whether you need a new resistor, blower motor, or wiring repair.
8. Can a blown fuse cause the B0197 code?
Yes, a blown fuse in the blower motor circuit could interrupt power and trigger this code. Check and replace any blown fuses.
9. Is the B0197 code specific to GMC vehicles?
While B0197 can appear on other vehicle brands, it’s most commonly associated with GMC and other GM vehicles due to their specific diagnostic codes.
10. Will resetting the code fix the B0197 issue?
Resetting the code may clear it temporarily, but the underlying issue must be repaired to prevent the code from reappearing.
Discuss the causes and fixes for B0197 GMC OBDII Code
Code B0197 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
