AutoCodes – GMC – B0195 GMC

B0195 GMC Code - Front Blower Motor Speed Circuit Low

Quick Answer

The Blower Motor Control Module is an interface between the Heating, Ventilation, and Air Conditioning (HVAC) Control Module and the blower motor. Common causes include Faulty Front Blower Motor, Front Blower Motor harness is open or shorted, Front Blower Motor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B0195 GMC indicates Front Blower Motor Speed Circuit Low.
Common causes: Common causes include Faulty Front Blower Motor, Front Blower Motor harness is open or shorted, Front Blower Motor circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 992

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 10, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0195 GMC Description

The Blower Motor Control Module is an interface between the Heating, Ventilation, and Air Conditioning (HVAC) Control Module and the blower motor. The blower motor speed control from the HVAC control module, battery positive and ground circuits enable the blower motor control module to operate. The HVAC control module provides a Pulse Width Modulation (PWM) signal to the blower motor control module in order to command the blower motor speed. The blower motor control module transfers the PWM signal into a corresponding blower motor voltage. The voltage resides between 2-13 V and changes linear to the height of the PWM signal.

OBDII Code B0195 GMC - Front Blower Motor Speed Circuit Low - AutoCodes.com — B0195 GMC Code - Front Blower Motor Speed Circuit Low

What does this mean?

What are the Possible Causes of the DTC B0195 GMC?

Faulty Front Blower Motor
Front Blower Motor harness is open or shorted
Front Blower Motor circuit poor electrical connection
Faulty Blower Motor Control Module

How to Fix the DTC B0195 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0195 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0195 GMC code?

Need more information on how to fix the B0195 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0195 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0195 GMC Code

1. What does the OBDII code B0195 on a GMC mean?

The B0195 code indicates a problem with the Front Blower Motor Speed Circuit, specifically that it is reading a low voltage.

2. What are the symptoms of the B0195 code on a GMC vehicle?

Common symptoms include reduced or no airflow from the HVAC system, inability to control blower motor speed, and possible climate control malfunctions.

3. What causes the B0195 code on a GMC?

The code is typically caused by a faulty blower motor, a defective blower motor resistor, wiring issues such as shorts or open circuits, or a malfunctioning HVAC control module.

4. How can I diagnose the B0195 code?

Start by inspecting the blower motor, resistor, and associated wiring for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.

5. Can a blown fuse cause the B0195 code?

Yes, if the fuse for the blower motor circuit is blown, it can cause the circuit to show low voltage and trigger the B0195 code.

6. How do I fix the B0195 code on a GMC?

Repairs may include replacing a damaged blower motor, replacing the blower motor resistor, repairing or replacing damaged wiring, or reprogramming or replacing the HVAC control module.

7. Can I drive my GMC with the B0195 code active?

Yes, you can drive, but without a functioning blower motor, you may experience discomfort due to lack of heating, cooling, or defogging capabilities.

8. How much does it cost to fix the B0195 code?

Repair costs can range from $100 to $500, depending on whether the blower motor, resistor, or control module needs replacement.

9. How can I prevent the B0195 code from occurring again?

Regularly inspect and maintain the HVAC system, including the blower motor and its wiring. Address any electrical issues promptly to avoid circuit failures.

10. Will clearing the B0195 code with a scanner fix the problem?

Clearing the code with a scanner will reset it temporarily, but the underlying issue must be resolved to prevent the code from returning.