AutoCodes – Buick – B0150 Buick

B0150 Buick Code - Air Flow Position Feedback #3 Circuit Malfunction

Quick Answer

The actuators operate using 5 circuits. Common causes include Faulty Auxiliary Mode Actuator, Auxiliary Mode Actuator harness is open or shorted, Auxiliary Mode Actuator circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B0150 Buick indicates Air Flow Position Feedback #3 Circuit Malfunction.
Common causes: Common causes include Faulty Auxiliary Mode Actuator, Auxiliary Mode Actuator harness is open or shorted, Auxiliary Mode Actuator circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 926

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 10, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0150 Buick Description

The actuators operate using 5 circuits. A 5-volt reference, low reference, signal circuit and two bi-directional 0 or 12 volt control circuits. The Heating, Ventilation, and Air Conditioning (HVAC) Control Module supplies a low reference and 5-volt reference to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. As the actuator door changes position the door position signal circuit voltage also changes. The two bi-directional control circuits enable the actuator to operate. Both circuits are set to 0 volts when the HVAC control module detects, from the feedback potentiometer, that the actuator is in the desired position. In order to move the actuator, the HVAC control module switches the appropriate control circuit to 12 volts.

OBDII Code B0150 Buick - Air Flow Position Feedback #3 Circuit Malfunction - AutoCodes.com — B0150 Buick Code - Air Flow Position Feedback #3 Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC B0150 Buick?

Faulty Auxiliary Mode Actuator
Auxiliary Mode Actuator harness is open or shorted
Auxiliary Mode Actuator circuit poor electrical connection
Faulty Auxiliary Heating, Ventilation, and Air Conditioning (HVAC) Control Module

How to Fix the DTC B0150 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0150 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0150 Buick code?

Need more information on how to fix the B0150 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0150 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0150 Buick Code

1. What are the common symptoms of OBDII code B0150 Buick related to the Air Flow Position Feedback #3 Circuit Malfunction?

- Common symptoms include engine stalling, rough idle, poor acceleration, and the Check Engine light illuminated on the dashboard.

2. What are the possible causes of OBDII code B0150 Buick?

- The code B0150 Buick can be triggered by issues such as a faulty air flow sensor, damaged wiring or connectors, or a problem with the engine control module (ECM).

3. How can I diagnose the Air Flow Position Feedback #3 Circuit Malfunction related to code B0150 Buick?

- Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code and then inspecting the air flow sensor, wiring, and connectors for any visible damage or issues.

4. Can a dirty air filter trigger OBDII code B0150 Buick?

- While a dirty air filter can affect engine performance, it is unlikely to directly trigger the B0150 code. However, it is still essential to regularly replace the air filter to maintain optimal engine health.

5. How can I repair OBDII code B0150 Buick at home?

- Repairing code B0150 may involve replacing the faulty air flow sensor, repairing any damaged wiring or connectors, or resetting the ECM. It is recommended to consult a professional if you are unfamiliar with these procedures.

6. Is it safe to continue driving with OBDII code B0150 Buick present?

- It is not recommended to continue driving with the B0150 code active, as it can lead to further engine damage or performance issues. It is best to address the underlying cause promptly.

7. Can a disconnected or loose air flow sensor cause OBDII code B0150 Buick?

- Yes, a disconnected or loose air flow sensor can trigger the B0150 code as it disrupts the feedback signals essential for proper engine operation.

8. How can I prevent OBDII code B0150 Buick from recurring?

- To prevent the B0150 code from recurring, ensure regular maintenance of the air flow sensor, wiring, and connectors, and address any engine performance issues promptly.

9. Will resetting the Check Engine light resolve OBDII code B0150 Buick?

- Resetting the Check Engine light may temporarily turn it off, but it will not fix the underlying issue causing the B0150 code. It is crucial to diagnose and address the root cause of the problem.

10. Can extreme weather conditions affect OBDII code B0150 Buick?

- Extreme weather conditions such as excessive heat or cold can potentially exacerbate existing issues related to the air flow sensor or wiring, leading to the triggering of the B0150 code.