B0130 Scion Code - Short Right Seat Belt Pretensioner Squib Circuit
Quick Answer
The right seat belt pretensioner squib circuit consists of the air bag center sensor and right seat belt pretensioner. Common causes include Faulty Right Seat Belt Pretensioner, Right Seat Belt Pretensioner harness is open or shorted, Right Seat Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0130 Scion indicates Short Right Seat Belt Pretensioner Squib Circuit.
- Common causes
- Common causes include Faulty Right Seat Belt Pretensioner, Right Seat Belt Pretensioner harness is open or shorted, Right Seat Belt Pretensioner circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0130 Scion Description
What are the Possible Causes of the DTC B0130 Scion?
- Faulty Right Seat Belt Pretensioner
- Right Seat Belt Pretensioner harness is open or shorted
- Right Seat Belt Pretensioner circuit poor electrical connection
- Faulty Air Bag Control Module
How to Fix the DTC B0130 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0130 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0130 Scion code?
Need more information on how to fix the B0130 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0130 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0130 Scion Code
1. What are the common symptoms of OBDII code B0130 in a Scion related to the Short Right Seat Belt Pretensioner Squib Circuit?
- The common symptoms include an illuminated airbag warning light on the dashboard and potential issues with the right seat belt pretensioner system.
2. What are the possible causes of the Short Right Seat Belt Pretensioner Squib Circuit OBDII code B0130 in a Scion?
- The code B0130 can be triggered by a faulty seat belt pretensioner squib, damaged wiring or connectors in the circuit, or a malfunction in the airbag control module.
3. How can I diagnose the Short Right Seat Belt Pretensioner Squib Circuit issue in my Scion triggering the OBDII code B0130?
- Diagnosis involves using a scan tool to retrieve the specific fault code, inspecting the seat belt pretensioner system components, and checking the wiring and connectors for any visible damage.
4. Can I continue driving my Scion with the OBDII code B0130 related to the Short Right Seat Belt Pretensioner Squib Circuit?
- It is not recommended to drive the vehicle with an active airbag system fault code, as it may compromise the effectiveness of the seat belt pretensioner system in the event of a collision.
5. How can I repair the Short Right Seat Belt Pretensioner Squib Circuit issue causing the OBDII code B0130 in my Scion?
- Repair options may include replacing the faulty seat belt pretensioner squib, repairing or replacing damaged wiring and connectors, and resetting the airbag control module after the issue is resolved.
6. Is it possible to reset the OBDII code B0130 related to the Short Right Seat Belt Pretensioner Squib Circuit in a Scion without fixing the underlying issue?
- While clearing the fault code may temporarily turn off the warning light, the issue causing the code will persist and should be addressed to ensure the proper functioning of the seat belt pretensioner system.
7. How much does it typically cost to repair the Short Right Seat Belt Pretensioner Squib Circuit issue leading to the OBDII code B0130 in a Scion?
- The cost of repair can vary depending on the specific cause of the issue, but it may involve parts and labor expenses ranging from $100 to $500 or more, depending on the extent of the repairs needed.
8. Are there any safety concerns associated with the OBDII code B0130 related to the Short Right Seat Belt Pretensioner Squib Circuit in a Scion?
- Yes, unresolved issues with the seat belt pretensioner system indicated by the B0130 code can affect the proper deployment of the seat belt in a collision, potentially compromising occupant safety.
Discuss the causes and fixes for B0130 Scion OBDII Code
Code B0130 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
