B0108 Scion Code - Short To Battery In P Squib Circuit
Quick Answer
The P squib circuit consists of the airbag sensor assembly, passenger airbag manual on–off switch and front passenger airbag assembly. Common causes include Faulty Front Passenger Airbag Assembly (P Squib), Front Passenger Airbag Assembly (P Squib) harness is open or shorted, Front Passenger Airbag Assembly (P Squib) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0108 Scion indicates Short To Battery In P Squib Circuit.
- Common causes
- Common causes include Faulty Front Passenger Airbag Assembly (P Squib), Front Passenger Airbag Assembly (P Squib) harness is open or shorted, Front Passenger Airbag Assembly (P Squib) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0108 Scion Description
What are the Possible Causes of the DTC B0108 Scion?
- Faulty Front Passenger Airbag Assembly (P Squib)
- Front Passenger Airbag Assembly (P Squib) harness is open or shorted
- Front Passenger Airbag Assembly (P Squib) circuit poor electrical connection
- Faulty Airbag Sensor Assembly
How to Fix the DTC B0108 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0108 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0108 Scion code?
Need more information on how to fix the B0108 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0108 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0108 Scion Code
1. What are the common symptoms of OBDII code B0108 in a Scion related to a short to battery in the P Squib circuit?
- Common symptoms may include an illuminated airbag warning light on the dashboard, non-functioning airbags, and potential issues with other safety features.
2. What can cause the OBDII code B0108 in a Scion indicating a short to battery in the P Squib circuit?
- The code B0108 can be triggered by a short circuit in the P Squib circuit, faulty wiring, damaged connectors, or issues with the airbag control module.
3. How serious is the OBDII code B0108 in a Scion, indicating a short to battery in the P Squib circuit?
- This code is related to the airbag system, and it is crucial to address it promptly as it may compromise the proper functioning of the airbags in case of an accident.
4. Can a DIY enthusiast repair OBDII code B0108 in a Scion themselves?
- Repairing OBDII code B0108 may require specialized knowledge and tools, so it is recommended to seek assistance from a qualified mechanic or dealership.
5. What are some general repair tips for resolving OBDII code B0108 in a Scion?
- Inspect the wiring and connectors in the P Squib circuit for any damage or short circuits. Ensure all connections are secure and repair or replace any faulty components as needed.
6. How can a mechanic diagnose the OBDII code B0108 in a Scion accurately?
- A mechanic may use a diagnostic scanner to retrieve the specific error codes, inspect the airbag system components, perform continuity tests on the wiring, and conduct a thorough visual inspection.
7. Are there any safety precautions to consider when dealing with OBDII code B0108 in a Scion?
- Prior to working on the airbag system, it is essential to disconnect the vehicle's battery and wait for at least 10 minutes to discharge any residual power to prevent accidental airbag deployment.
8. Can ignoring OBDII code B0108 in a Scion lead to more severe problems?
- Ignoring OBDII code B0108 may result in the airbags not deploying correctly in the event of a collision, putting occupants at risk of more severe injuries.
9. How long does it typically take to repair OBDII code B0108 in a Scion?
- The repair time for OBDII code B0108 can vary depending on the extent of the issue, but it may take a few hours to a full day for a mechanic to diagnose and fix the problem.
10. Is it necessary to reset the OBDII system after repairing code B0108 in a Scion?
- Yes, it is recommended to clear the error codes and reset the OBDII system after repairing code B0108 to ensure the issue has been successfully addressed and to turn off the warning light on the dashboard.
Discuss the causes and fixes for B0108 Scion OBDII Code
Code B0108 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
