B00E6 Code - Third Row Right Seatbelt Pretensioner 'C' Deployment Control
Quick Answer
The Air Bag Control Module monitors the Third Row Right Seatbelt Pretensioner 'C'. Common causes include Faulty Third Row Right Seatbelt Pretensioner 'C', Third Row Right Seatbelt Pretensioner 'C' harness is open or shorted, Third Row Right Seatbelt Pretensioner 'C' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B00E6 indicates Third Row Right Seatbelt Pretensioner 'C' Deployment Control.
- Common causes
- Common causes include Faulty Third Row Right Seatbelt Pretensioner 'C', Third Row Right Seatbelt Pretensioner 'C' harness is open or shorted, Third Row Right Seatbelt Pretensioner 'C' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B00E6 Description
What are the Possible Causes of the DTC B00E6?
- Faulty Third Row Right Seatbelt Pretensioner 'C'
- Third Row Right Seatbelt Pretensioner 'C' harness is open or shorted
- Third Row Right Seatbelt Pretensioner 'C' circuit poor electrical connection
How to Fix the DTC B00E6?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B00E6 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B00E6 code?
Need more information on how to fix the B00E6 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B00E6 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B00E6 Code
No Frequently Asked Questions about B00E6 Code found.
Discuss the causes and fixes for B00E6 OBDII Code
Code B00E6 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.