B00E0 Code - Third Row Left Seatbelt Pretensioner 'B' Deployment Control
Quick Answer
The Air Bag Control Module monitors the Third Row Left Seatbelt Pretensioner 'B'. Common causes include Faulty Third Row Left Seatbelt Pretensioner 'B', Third Row Left Seatbelt Pretensioner 'B' harness is open or shorted, Third Row Left Seatbelt Pretensioner 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B00E0 indicates Third Row Left Seatbelt Pretensioner 'B' Deployment Control.
- Common causes
- Common causes include Faulty Third Row Left Seatbelt Pretensioner 'B', Third Row Left Seatbelt Pretensioner 'B' harness is open or shorted, Third Row Left Seatbelt Pretensioner 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B00E0 Description
What are the Possible Causes of the DTC B00E0?
- Faulty Third Row Left Seatbelt Pretensioner 'B'
- Third Row Left Seatbelt Pretensioner 'B' harness is open or shorted
- Third Row Left Seatbelt Pretensioner 'B' circuit poor electrical connection
How to Fix the DTC B00E0?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B00E0 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B00E0 code?
Need more information on how to fix the B00E0 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B00E0 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B00E0 Code
What does the OBDII code B00E0 mean?
The B00E0 code refers to an issue with the Third Row Left Seatbelt Pretensioner 'B' Deployment Control, which is part of the vehicle's safety restraint system.
What are common symptoms of the B00E0 code?
Common symptoms include an illuminated airbag warning light, potential malfunction of the seatbelt pretensioner, or the seatbelt not locking properly during sudden stops.
What causes the B00E0 code to appear?
The code can be caused by a faulty seatbelt pretensioner, damaged wiring or connectors, a blown fuse, or an issue with the airbag control module.
Can I safely drive with the B00E0 code active?
It is not recommended to drive with this code active, as the seatbelt pretensioner may not function properly during an accident, reducing the effectiveness of the safety restraint system.
How do I diagnose the B00E0 code?
Diagnosing involves scanning the vehicle with an OBDII scanner, inspecting the wiring and connectors for damage, and testing the seatbelt pretensioner for functionality.
What is the function of a seatbelt pretensioner?
A seatbelt pretensioner tightens the seatbelt during a collision, keeping occupants securely restrained and reducing the risk of injury.
How do I fix the B00E0 code?
Fixes may include repairing or replacing the seatbelt pretensioner, checking and repairing damaged wiring, replacing blown fuses, or reprogramming the airbag control module.
What tools are needed to troubleshoot the B00E0 code?
You may need an OBDII scanner, a multimeter for electrical testing, and basic tools to access the seatbelt assembly and wiring.
Are repairs for the B00E0 code covered under warranty?
Repairs may be covered under the vehicle's safety system or powertrain warranty, depending on the manufacturer and vehicle age. Check with your dealership for specific details.
Can a professional mechanic fix the B00E0 code?
Yes, a qualified mechanic or dealership technician can diagnose and repair the B00E0 code, ensuring the seatbelt system functions correctly.
Discuss the causes and fixes for B00E0 OBDII Code
Code B00E0 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
