B008F 2016 GMC Sierra Code - Rollover Protection Disable Switch
Quick Answer
When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B008F 2016 GMC Sierra indicates Rollover Protection Disable Switch.
- Common causes
- Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B008F 2016 GMC Sierra Description
What are the Possible Causes of the DTC B008F 2016 GMC Sierra?
- Faulty Rollover Protection Disable Switch
- Rollover Protection Disable Switch harness is open or shorted
- Rollover Protection Disable Switch circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B008F 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B008F 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B008F 2016 GMC Sierra code?
Need more information on how to fix the B008F 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B008F 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B008F 2016 GMC Sierra Code
What does the OBDII code B008F mean in a 2016 GMC Sierra?
B008F indicates a problem with the Rollover Protection Disable Switch, which is responsible for controlling the rollover protection system.
What are the common symptoms of the B008F code?
Common symptoms may include the airbag warning light being illuminated, potential malfunction of rollover protection systems, and possibly other warning indicators related to safety features.
What could cause the B008F code to trigger?
Causes may include a faulty rollover protection disable switch, damaged wiring or connectors, or issues with the airbag control module.
Can driving with the B008F code be dangerous?
Yes, driving with this code can be dangerous as it may indicate a malfunction in the rollover protection system, potentially compromising passenger safety in the event of a rollover.
How can I diagnose the issue related to the B008F code?
To diagnose, use an OBDII scanner to confirm the code and check for any additional codes. Inspect the rollover protection disable switch and associated wiring for damage or poor connections.
What are some repair tips for fixing the B008F code?
Repair tips include inspecting and repairing any damaged wiring, replacing the rollover protection disable switch if faulty, and ensuring all connections are clean and secure.
Is it necessary to clear the B008F code after repairs?
Yes, after making the necessary repairs, you should clear the code using an OBDII scanner and conduct a test drive to ensure the issue is resolved.
How much might it cost to repair the B008F code issue?
Repair costs can vary widely depending on the cause; replacing a switch may cost less than $100, while more extensive electrical issues may cost several hundred dollars.
Will the B008F code cause my vehicle to fail an emissions test?
No, the B008F code is not related to emissions control systems, so it typically will not affect emissions testing results.
Can I reset the B008F code myself?
Yes, you can reset the code yourself using an OBDII scanner, but if the underlying issue is not fixed, the code may return.
Discuss the causes and fixes for B008F 2016 GMC Sierra OBDII Code
Code B008F 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
