AutoCodes – Chevrolet – B008F 2016 Chevrolet Silverado

B008F 2016 Chevrolet Silverado Code - Rollover Protection Disable Switch

Quick Answer

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B008F 2016 Chevrolet Silverado indicates Rollover Protection Disable Switch.
Common causes: Common causes include Faulty Rollover Protection Disable Switch, Rollover Protection Disable Switch harness is open or shorted, Rollover Protection Disable Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 333

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 24, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B008F 2016 Chevrolet Silverado Description

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within inflatable restraint sensing and diagnostic module itself. The inflatable restraint sensing and diagnostic module continuously checks the rollover protection disable switch position and circuit defect by letting the regular voltage flow through the rollover protection disable switch circuit and verifying the current.

OBDII Code B008F 2016 Chevrolet Silverado - Rollover Protection Disable Switch - AutoCodes.com — B008F 2016 Chevrolet Silverado Code - Rollover Protection Disable Switch

What does this mean?

What are the Possible Causes of the DTC B008F 2016 Chevrolet Silverado?

Faulty Rollover Protection Disable Switch
Rollover Protection Disable Switch harness is open or shorted
Rollover Protection Disable Switch circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B008F 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B008F:02 Rollover Protection Disable Switch Circuit Short to Ground
B008F:05 Rollover Protection Disable Switch Circuit High Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B008F 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B008F 2016 Chevrolet Silverado code?

Need more information on how to fix the B008F 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B008F 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B008F 2016 Chevrolet Silverado Code

1. What does the OBDII code B008F in a 2016 Chevrolet Silverado indicate?

The code B008F indicates a fault with the Rollover Protection Disable Switch in the Chevrolet Silverado.

2. What are common symptoms of a Rollover Protection Disable Switch issue in a 2016 Silverado?

Common symptoms include the airbag warning light staying illuminated on the dashboard and a message indicating an issue with the rollover protection system.

3. What can cause the Rollover Protection Disable Switch to trigger the B008F code in a 2016 Silverado?

The code B008F can be triggered by a malfunction in the rollover protection system, a faulty disable switch, or damaged wiring connections.

4. How can I diagnose the Rollover Protection Disable Switch issue triggering the B008F code in my 2016 Silverado?

Diagnosis involves using an OBDII scanner to retrieve the specific B008F code, inspecting the disable switch and wiring for damage, and checking for any loose connections.

5. Can I continue driving my 2016 Chevrolet Silverado with the B008F code related to the Rollover Protection Disable Switch?

It is not recommended to drive the vehicle with the B008F code active, as it indicates a potential safety issue with the rollover protection system.

6. How can I repair the Rollover Protection Disable Switch problem causing the B008F code in my 2016 Silverado?

Repair options include replacing the faulty disable switch, repairing damaged wiring connections, or addressing any underlying issues with the rollover protection system.

7. Are there any recalls or service bulletins related to the Rollover Protection Disable Switch issue in the 2016 Chevrolet Silverado?

Check with a Chevrolet dealership or visit the NHTSA website to see if there are any recalls or service bulletins related to the B008F code in your specific Silverado model.

8. Can a DIY enthusiast fix the Rollover Protection Disable Switch issue triggering the B008F code in a 2016 Silverado?

While some basic diagnosis and repairs can be done by DIY enthusiasts, addressing the Rollover Protection Disable Switch issue may require specialized tools and expertise.

9. Is it necessary to reset the OBDII system after repairing the Rollover Protection Disable Switch issue in a 2016 Silverado?

Yes, it is recommended to reset the OBDII system after repairing the issue to clear the B008F code and ensure proper functioning of the vehicle's diagnostic system.

10. How can I prevent future occurrences of the B008F code related to the Rollover Protection Disable Switch in my 2016 Chevrolet Silverado?

Regularly inspecting the rollover protection system, disable switch, and wiring for any signs of damage or wear can help prevent future occurrences of the B008F code.